IM November/December 2026 | Página 44

CONTINUOUS CUTTING
The result of more than 10 years of research and development, the Komatsu MC51 is fully electric, outputting zero emissions
development and production scenarios.“ What stands out most is what collaboration made possible. We were fortunate to work alongside the teams at Niobec and Komatsu, whose expertise and willingness to test new approaches helped push this technology forward. As the industry continues to explore mechanical excavation, we’ re excited to see how partnerships like this one continue to shape what’ s possible in the industry.”
Pierre‐Luc Lajoie, Manager, Mining Operations and Asset Management at Niobec, shared Kohtakangas’ enthusiasm when it came to looking out for the MC51’ s next deployment, as well as how other hardrock mechanical excavation technologies develop in the future.
He explained that Niobec selected the MC51 for a 500-m-long, 5.2-x-5.2-m diameter exploration drift after evaluating other options such as roadheaders.
He was confident the underground mine would provide a good testing ground for the MC51, with carbonatite rock that was relatively strong and only mildly abrasive.
“ We don’ t have much silica in the rock, so the abrasivity is relatively low,” he told IM.“ We never sharpen any drill bits that we use, for example; we just drill down until the metal gets fatigued.”
Lajoie said the hard-rock cutting proposition at Niobec was on the edge of what roadheaders had proven to cut in Canada and the US in other mining-related tunnelling applications.
“ Given the financial proposition offered by the OEMs with hard-rock cutting solutions in the market and the availability of machines, we decided to partner with Komatsu and Cementation on the MC51,” he explained.
At peak rates towards the end of the 10-month project, the MC51 was achieving close to 100 m / mth, which is what had been modelled by Komatsu during the scoping phase of the project.
Beyond the development metres metric that the MC51 will be benchmarked by, Lajoie thinks ongoing mine maintenance should also come into the equation when comparing the potential use of machines like this with drill and blast.
He explained:“ It’ s one thing to compare the mechanical cutting development rates to traditional drill and blast, but there are also side benefits to be realised, which can help our overall operating expenses at the mine. For example, we can carry out much more effective and sustainable ground support measures in these tunnels than we can with drill and blast developments. We also expect that the roadways will require less maintenance.
“ These are metrics we have not yet quantified, but we feel need to be factored into any future conversations and discussions about hard-rock mechanical cutting.”
He also left the door open for future hardrock cutting developments at the mine.
“ We will have other projects come up that may not be deemed‘ production-critical’,” he said.“ At that point, I hope we can consider the MC51 and other machines on the market as they get closer to achieving commercial mining status.”
Robbins on mining’ s stepping stones
Having progressed through some 3,000 m of development at Fresnillo’ s namesake mine in Mexico, Robbins’ MDM5000 machine is about to come out of the underground operation ready for a new test.
Back in 2021, Fresnillo conducted an initial trial using the MDM5000, a tunnel boring machine( TBM) that uses disc cutter technology proven on traditional circular machines. It was billed as being able to excavate rock up to 200 MPa in rectangular cross section tunnels( with a flat bottom / floor) with dimensions of 5 m x 4.5 m. This is thanks to a reciprocating cutterhead able to exhibit a swinging motion and sidewall grippers to keep the unit in place.
The MDM5000 excavated a tunnel along a straight northwest alignment for 1,272 m at Fresnillo, then turned southwest to excavate a curved section for 477 m, for a total length of 1,749 m. The progress rates for the unit varied during this initial trial section from 7 m / d to 12 m / d.
Conventional ground support comprising pattern rock bolts with upper profile mesh was installed concurrently with the advance of the unit, and mucking was completed using a belt conveyor suspended from the tunnel roof. The initial trial section was terminated after the intersection of a major geological fault of crushed rock varying from 6-18 m and with groundwater inflows of 100 litres per second at plus-50 ° F.
In 2024, in an attempt to avoid the intersection, and after self-propelling the unit backwards 500 m from the fault, a second trial commenced along a 2.8 km section in the same area of the mine, but with a section that is oriented sub-parallel to the prominent veins.
The progress rates for the unit varied during this second trial section, ranging from 5 m / d to 7 m / d, and were limited by an electrical power restriction of five hours per day. The trial also included the successful passage through a fault, achieved through careful planning.
Brad Grothen, VP of Engineering at Robbins, said the company continues to monitor the market demand for the MDM5000’ s ability to deliver rectangular tunnel profiles at advanced speeds, but Robbins’ main technology development hours were now being spent on what he referred to as the“ 12 % profile” machine.
He told IM:“ If somebody really wants a rectangular tunnel, we have this on hand with the MDM5000. But, for us, the horseshoe shape that comes with the 12 % machine is a significantly more practical for mining applications.” Practical how?“ It’ s got all the advantages of a regular TBM, which will provide much higher advanced rates in both good and difficult geologies, in addition to the added flexibility of being modular in construction, meaning mines can break it down for transport into the underground environment,” he said, adding that this flexibility also extended to the machine profile, with 25 sq. m, 50 sq. m or other options readily available.
This new solution will be able to create a horseshoe-shape profile by integrating both the full-face cutting offered by a TBM and additional drum cutters behind the cutter head. It still achieves the flat floor miners are
42 International Mining | NOVEMBER / DECEMBER 2026