IM November/December 2026 | Page 18

DRIVES & CONTROLS
Kumera continues:“ The difference becomes particularly clear when the two designs are compared physically. A typical 3 MW bevel-helical conveyor gearbox weighs approximately 25 t, while the new 5 MW bevel-planetary design is expected to weigh approximately 38 t. Rated power therefore increases by around 67 %, while gearbox
Geared drive systems offer advantages in size and mass, whereas direct drives avoid the mechanical gearbox.
The company concludes:“ There is therefore no universally superior concept. The optimum solution depends on the complete installation, including speed, torque, efficiency, accessibility and lifecycle considerations. The new 5 MW bevel-planetary gearbox is intended to ensure that the geared-drive alternative remains attractive as overland conveyors move into higher power classes” and heating options allow for a flexible temperature management, which also enables use in highly fluctuating ambient conditions and extends lubricant life. Large roller bearings and centre distances increase the load capacity and service life of the components
NORD’ s modular products also offer numerous features and options to round out the required set of functions. This includes reinforced bearings for increased radial loads, drum couplings for compensation of misalignments and brakes for controlled movements. mass increases by approximately 52 %.”
For shaft-mounted conveyor drives, it says this is particularly relevant because gearbox weight contributes directly to the loads acting on the pulley shaft and its bearings.
Both designs have been produced as 1:10 scale models. Displayed side by side, they illustrate that moving into a higher power class does not necessarily mean making the existing transmission proportionally larger.
At multi-megawatt power levels, efficiency and thermal management are closely connected. Even a small percentage of mechanical loss represents a substantial amount of heat that must ultimately be transferred to the environment. This can be particularly challenging for conveyor drives operating continuously at remote mining sites and at high altitude.
Conventional thermal management of a large industrial gearbox may require a separate oil cooling system with pumps, heat exchangers, pipework, instrumentation and electrical equipment. These components also have to be installed, monitored and maintained.
Kumera:“ One key objective of the new 5 MW gearbox was therefore to eliminate the need for a separate oil cooling unit. The underlying technical solution is currently subject to a patent application and cannot yet be disclosed. Reducing auxiliary equipment, however, simplifies the overall drive installation and can reduce maintenance requirements – an important consideration at remote mining sites.”
At these power levels, low-speed synchronous direct drives are another option. Eliminating the gearbox removes mechanical components, losses and maintenance requirements, while a geared drive allows a smaller, high-speed motor to generate mechanical power at lower torque.
Scale model of Kumera 3 MW bevelhelical gearbox in the foreground, with 5 MW bevel-planetary gearbox in the background
NORD’ s MAXXDRIVE ® series
Industrial gear units ensure the availability of demanding heavy duty applications such as belt conveyor systems in mines. NORD DRIVESYSTEMS says it guarantees this with industrial gear units from the MAXXDRIVE ® series citing advantages including a robust design and application-specific adaptability. It states:“ Thanks to their one-piece UNICASE™ housings, NORD’ s industrial gear units withstand high radial and axial loads. They are manufactured in a single step, ensuring that all bearing seats are exactly flush with one another. This reduces the susceptibility to errors and increases the gear unit’ s service life. The housings can accommodate large roller bearings, keeping friction and material wear to a minimum. In combination with case-hardened gearwheels that are precisely aligned with the shafts, the design, all in all, results in quiet running with low vibration.”
Furthermore, it says MAXXDRIVE ® can be tailored to your specific application requirements.“ This allows for optimum operation with efficiency, low wear and, as a result, long lifetimes. MAXXDRIVE ® comprises the four product series XD, XJ, XT and XC, which address typical requirements in various heavy duty applications. Due to their variety of installation positions and mounting surfaces, they allow precise use in various drive designs.”
A commonly used option for mining conveyors is the right-angle gear version of the MAXXDRIVE ® XC industrial gear unit, manufactured according to the proven UNICASE housing principle and is available in all sizes. Various sealing options enable the industrial gear units to be adapted to a wide range of ambient conditions. Cooling
Thanks to their one-piece UNICASE™ housings, NORD’ s MAXXDRIVE ® industrial gear units withstand high radial and axial loads
Users therefore have the option of purchasing the entire heavy duty drive solution from NORD as a single-source provider. With a network covering more than 80 countries, the manufacturer also says it enables short delivery times for both standard and custom solutions.
Enter the Hägglunds CA280
The Hägglunds CA radial piston hydraulic motor series was developed for a very specific purpose: to provide a tough and powerful solution for heavy-duty applications where size and weight are significant issues. The result is a really compact hydraulic drive with the same durability, excellent performance and reliability as other Hägglunds motors from Bosch Rexroth. With its small envelope size and lightweight, the Hägglunds CA has an excellent power to weight ratio.
Now, after an extensive period of development, testing and validation, Hägglunds earlier this year released the largest model yet in the series – the new CA280 – which is now ready for mining and other industrial applications. Hägglunds’ Daniel Kajhager, Head of Global Engineering states:“ The focus has been clear: delivering high torque in a compact format, without compromising on robustness or reliability.”
The CA platform is built for demanding
16 International Mining | NOVEMBER / DECEMBER 2026