Laser 3 Plus Process
Laser 3 Plus Combustion
|
OPTIMIZED FOR
CO
|
OPTIMIZED FOR
O 2
|
OPTIMIZED FOR
CO
|
OPTIMIZED FOR
O 2
|
OPTIMIZED FOR
CO + CH 4
|
Capable of being optimized for the fast, accurate and responsive measurement of process oxygen or carbon monoxide in hot or hazardous conditions, the process control version monitors these gases in processes where such monitoring is vital for the safe, efficient and reliable running of the process. It is essential for safety applications.
Compact for simple installation, it offers fast response times, low maintenance, only annual calibration, no contact with the process and an average measurement across the process.
An inbuilt measurement reference guarantees measurement lock without the need for reference purge gases, or the need to rely on the process conditions.
This provides peace of mind, lower maintenance and enhanced diagnostics.
The Combustion version can be optimized for CO measurements, for O 2
, or for a combination of CO and CH 4.
Servomex’ s Combustion CO and Combustion CO + CH 4 models are a must for safety applications in gas-fired and coal-fired processes. They can monitor CO in flue gas to trim oxygen levels and optimize combustion efficiency and safety. The CO + CH 4 version will also monitor light-off and running conditions to maximize safety.
The Combustion O 2 version measures oxygen in flue gas, used to control and optimize combustion efficiency. It uses two absorbance lines to optimize from ambient to 1500 o C, uniquely enabling the measurement of combustion O 2 with an air rather than nitrogen purge in processes over 700 o C.
“ Based around Servomex’ s revolutionary Laser 3 Plus platform developed at our UK Technical Centre, the Laser 3 Plus analyzer is a remarkable ninety per cent smaller and eighty per cent lighter than many other comparable TDL analyzers. As a consequence, the Laser 3 Plus’ s compact size and dramatically reduced footprint offers unparalleled installation flexibility and a host of cost and performance benefits.”
Rhys Jenkins, Photometric Product Manager rjenkins @ servomex. com
Find out more on the best in compact TDL analysis and watch the video at servomex. com / l3plus
P07