High Performance Pulse Jet Valve for Reverse Jet Bag Filters by Manik pulse valve | Page 2

Operation of pulse jet valve: Maniks pulse valves are worked by integral
solenoid pilot operator. When the valve is energised, the caught air above
pulse valve diaphragm is immediately exhausted causing quick opening of main
diaphragm valve. When the pilot valve is de - energised, air escapes through
drain opening of primary pulse valve to adjust the diaphragm pressure and
instantly shuts the valve.
Duty Cycle of pulse jet valve: The relative duty time cycle for ac voltage is 20%
and for DC voltage is 10 % .This implies energised time is maximum 1/5th of
de-energised time for AC and 1/10th for DC voltage.
Installation of pulse jet valve: Mounting in any position will not affect
operation. However good engineering practice is to avoid scale and condensed
water entering valve body for trouble free performance. Standard end
connections of BSP are provided.
Ask For Discount@ http://bit.ly/2g4gpVX
Maniks pulse jet valve features:
1. High flow rates
2. Very high cycle life
3. Threaded end body
4. Suitable for maximum medium temperature 650
5. Long life diaphragm of pulse jet valves
6. Normally closed, normally open; or double–acting




Special services:
We offer special service for your existing system components for pneumatic
pulse application, to recondition your inoperative pulse jet valves and assure
operating reliability as good as new. DO NOT scrap your valves (ONLY
IMPORTED) unless inspected by our experts.
We offer Spare diaphragm, Pilot solenoid and Coils for your Existing Imported
Valves.
We provide special enclosures for timers such as flame proof enclosures, SS
enclosures, FRP enclosures, IP65 enclosures on request.
We also cater to special requirement such as flame proof enclosures for valves.