Leather repair system B
B Leather Crack filler
Plast
i c,
Leather Crack filler from system B1
Part no. 00.014
Le
B Leather crack filler is a water based acrylic
paste that fills out scratches in leather or any
part of that grain that is missing.
B1
ath
er Repair
- Flexible filler, fast drying, easy to sand.
- Can be over coated with water based and
solvent based leather coatings.
- Resistant to common used leather cleaner
and protection
Drying time : 4 hours
Dust-dry after approx. :30 minutes
Set to touch after approx. :15 minutes
Sandable after approx. : 4 hours
Handling and Application
The Leather crack filler paste contains approximately 30% water, which means that
when the product is dry, the volume of the
product will have diminished by 30%. Consequently, deep scratches will probably have to
be refilled once more. The adhesion of a filler
is depending on the thickness of the product.
The thinner the product, the better the adhesion. The thicker the worse the adhesion.
Read the safety data CAREFULLY before
using this product.
You can sand B leather crack filler with fine
sanding paper (P320-P400) before adding the
final colour on the filled scratch.
00.014 Leather Crack filler 60ml.
Vinyl repair glue System B
B Compound
B Compound is a water based flexible
acrylic leather filler for holes in leather
and vinyl. Must be over coated with
water based or solvent based leather
coating. Resistant to common used
leather cleaner and protection.
Curing time:
Dust-dry after approx. 1 minute by heating at 140 degrees. Set to touch when
cooled down.
Handling and Application
Clean the area with plast cleaner part
no. 00.039. Fill the damaged area with
B Compound using the palette knife
part no. 00.013. Apply a mouldmaker
copy on top of the wet glue. Use the
heat sealing iron on the mould from
Mouldmaker part no. 00.021 and heat
the product until it is melting. Cool down
with cooling bag part no. 00.007 and
carefully remove the mould.
00.013 Palette knife
00.018 B Compound 60ml
28 - 29