Garage Doors Repair Service Garage Door Repair - Some Useful Tips | 页面 4

How to Repair a Garage Door Cable • Lock down the door. This will involve clamping the door to the track. It is the most basic step as it ensures the safety of the remaining process. It will prevent the door from moving unexpectedly and causing damage while working on the cable • Loosen the unbroken spring. On this task, winding bars are used. Here you shove a winding bar into the good spring through the winding cone. Then you loosen the two screws but hold the bar while doing such. As the screws are released, the spring will push. • Unwind the unbroken spring. In this process, two winding bars are used. At the 9:00 position, the second bar is inserted. Remove the bottom bar and unwind the spring a quarter turn at a time. Then in that process, the winding bars will be leapfrogging with each turn. • Springs disconnection from the Center bracket. This will involve removal of nuts and bolts. These nuts are the ones that fasten the stationary spring cones to the brackets. Then slide the springs towards the end brackets.