High Power Picosecond Pulse Laser
Peak power
High Power Picosecond Pulse Laser
The picosecond pulse laser series FPYL-Q-PS is offered with peak power up to 100W at a repetition rate of 1MHz and a pulse width of < 10ps . Available wavelengths are 266nm ( 1-8W ), 355nm ( 1-50W ), 532nm ( 1-80W ) and 1064nm ( 1- 100W ). The repetition frequency range is between 400kHz and 2MHz . The power stability is < 3 % (< 1 % optional ). The pulse-to-pulse stability is < 2 %. Both are measured in rms and over 4 hours . The output beam is transverse mode TEM00 and has high beam quality of M2 < 1,2 . With a beam diameter of ~ 3mm and a divergence < 1mrad the output beam is very well collimated .
The laser is delivered with an appropriate power supply for the
34 FDPP - www . fdpp . co . uk voltage range 100-240V as well as a water chiller .
Due to the high power with pulse widths < 10ps these lasers are excellent suited formicro material processing . Typical applications are :
Applications : ♦ Flexible Materials Processing ♦ Brittle Materials Processing ♦ OLEDs Processing
♦ Glass & Ceramic Cutting and Drilling
♦ Semiconductor Industry
www . frlaserco . com sales @ frlaserco . com
The laser is delivered with an appropriate power supply for the voltage range 100- 240V as well as a water chiller .