Kecol Pumping Systems
Kecol Pumping Systems offers
solutions to many product transfer
problems – read on to find out more.
K
ecol Pumping Systems Ltd are
manufacturers of Air driven,
Positive Displacement Piston
Pumps and Priming Devices in
polished stainless steel or carbon steel,
for transferring high viscosity non-
flowable products from drums and
containers as used in the cosmetic,
food, pharmaceutical, chemical and
general industries.
Products in drums or similar sized
vessels that normally need to be
heated in order to reduce the viscosity
- can be transferred cold. Products
with a viscosity up to 10,000 Poise can
be transferred (cold) using the Kecol
Maxiprime Pump and follower plate
system and is also used to transfer
pastes and products that stick to the
inside of an open top drum, wiping the
inside of the drum or vessel, eliminat-
ing product waste.
Kecol Air Powered Drum Pumps
and transfer systems are suitable
for all standard size closed top or
open top drums and can be adapted
to suit open top containers with an
internal diameter up to 1200mm.
Non contact parts as well as con-
tact parts are available in polished
stainless steel, clamp - type con-
struction is also available for
hygienic applications.
Typical applications in the food
industry include transferring tomato
The inside of a standard 200 litre Open Top
Drum is wiped clean – as the drum is emp-
tied – with minimal product waste
puree, concentrated fruit juice, honey,
fruit pastes, biscuit creams, jams,
butter, margarine, sweet mince meat,
sausage meat and meat pie fillings
with cooked vegetables.
Applications in the phar-
maceutical and cosmetic
industries include transfer-
ring mascara, petroleum jelly,
face creams, base creams,
magnesium hydroxide, alu-
minium hydroxide, tooth-
paste, lip-gloss waxes and
suntan lotions.
Kecol’s articulated
pump systems
Kecol’s articulated
pump systems
The Kecol Follower plate system will also
work on 200 litre Open Top Drums fitted with
an aseptic bag – wiping the bag clean
Applications in the chemical and
general industries include the transfer
of paints, resins, adhesives, polymers,
latex, high viscosity grease, mastic’s
and inks – all pumped cold without
pre-heating the products.
As manufacturers, Kecol Pumping
Systems can offer solutions to your
particular product transfer problem,
by offering a bespoke system designed
to exceed your particular production
requirements for single drum/vessel
use or multi drum use.
Kecol Pumping Systems Ltd
Faraday Drive
Bridgnorth
Shropshire
WV15 5BJ
T: 01746 764311
E: [email protected]
www.kecol.co.uk