economical operation, easy maintenance
and extensive customer support. Both
companies quickly agreed on the scope
and schedule and the project was ready
to begin. Due to its modular design, the system
can be easily integrated into existing
lines. The added BEUMER bag placer and
ream magazine make the filling system
even more efficient.
Filling process: not too much, not too
little
Due to the wide range of manufactured
building materials, BEUMER Group
installed a BEUMER fillpac R filling
machine that operates according to the
air filling principle. The bags are weighed
during the filling process. The BEUMER
fillpac is equipped with an electronic
calibration-capable weighing unit. Servomotors automatically, precisely and
energy-efficiently drive the application
unit and the suction gripper.
It ensures that the bags are always filled
with the same amount of material.
A special software enables filling spouts
and scale to constantly compare weights.
By using ultrasound to seal the bags, a
very clean and efficient technology, the
system can ensure optimal results. It
also avoids the accumulation of material
around the valve. “The BEUMER bag placer can be easily
adjusted to other bag formats by
the user. This increases the system’s
flexibility,” explains Denis Sielemann,
Senior Sales Manager, Building Materials,
at BEUMER Group.
The gripping and placing system takes
the bags from the stack and applies them
safely on the filling spout. 1,200 bags per
hour can be applied like this with high
precision. 1,800 bags are possible by
adding an extension.
www.beumergroup.com
FDPP - www.fdpp.co.uk 27