A
C
C
E
S
S
O
R
I
E
S
Sika MB Primer
A 2-component, solvent free, low viscosity, epoxy primer and DPM.
One coat solvent free moisture barrier primer. Excellent adhesion promoter over mastic asphalt and old adhesive residues. Recommended
for new and old cement screed. Easy application with roller.
Coverage: 1kg per 2m2 as DPM or 1kg per 4m2 as Primer
Drying time: 12 hours at 20°C.
SIMB10
10kg
£100.88
SOMB05
5kg
£55.74
Sikabond Rapid DPM
For priming, consolidating and sealing of: absorbent and non-absorbent sub-floors, consolidating weak cement screed and isolation of old
adhesive residues. Can be used as a Damp Proof Membrane on subfloors not under hydrostatic pressure. Can be used over underfloor
heating. (Max 3% moisture CM Method, 4.5% Tramex).
Drying Time: Approx 45 minutes at 50% Rh & 20°C
SIRAPDPM10
D
P
M
S
P
R
I
M
E
R
S
10 Litres
£93.19
SIRAPDMP
5 Litre
£49.39
Wakol Express Primer PU280
Primer for dusty or weak sub-floors, penetrates the concrete or screed
and forms a chemical bond with MS and PU Adhesives
With two coats, you have a Damp Proof Membrane. It will tackle
residual moisture in concrete up to 6% C.M
Drying time: 45 minutes after application - can start laying the floor.
LEPU2805
5kg
£57.00
LEPU28011
11kg
£112.50
Bona R410 DPM
A 2-component, solvent free, low viscosity, epoxy primer and DPM.
One coat solvent free moisture barrier primer. Excellent adhesion
promoter over mastic asphalt and old adhesive residues.
Drying time: Approx 24 hours per coat.
Coverage: For the 5KG tin is 20m2 with one coat. Where 2 coats are
required (for damp proofing purposes) the tin will cover 10m2.
BOR410
£71.95
Bona R580
Bona R580 is a one component silane-based moisture barrier for securing damp sub floors. For faster bonding Bona R580 can be used
as a two component system - just add water from the bag enclosed.
Drying time, until (for 1-comp):
• Application of Bona silane-based adhesive: approx 6 hours
• Application of levelling compound: 8-12 hours
BOR58026
All prices exclude VAT & delivery
68
5kg
2-comp
6kg
£54.73