ED
OV ly
PR
AP comp e
to h th n
it
w
ditio
hE
17t iring
W
The quick and simple to install
solution for all tile and stone floors
ECOFLOOR
underfloor heating mat
ECOFLOOR Underfloor Heating Mats are a combination of a heating cable
attached to a fibreglass mesh scrim that makes
installation easy. The mat can simply be
rolled out onto the floor saving
precious time. The mats have double
sided tape on the underside so
they can easily be fixed to
any clean surface.
Features
=
=
=
=
=
=
=
=
Approved to EN60335-2-96
as required by the 17th Edition
Wiring Regulations ( BS7671:2008 )
Two heat outputs – 150W/m2 and 200W/m2
Quick installation – simply roll out the mat & fix to floor
Continuous metallic earth screen to ensure electrical safety
Suitable for tile, stone, slate and marble floor finishes
Low build height – minimal floor height build up
Suitable for use in wet areas
EMC safe
Technical Detail
=
=
=
=
Max Power Loading - 150W/m2 or 200W/m2
Diameter 3.0mm – 4.0mm
230V supply
Twin conductor heating cable with single 3m “cold tail” connection lead
Floor Construction
=
=
Suspended Floors - To prevent floor movement all wooden floorboards
must be covered with insulated tile backer board or 18mm Plywood.
Concrete Floors - It is recommended to fit a layer of insulated tile backer
board to minimise heat loss & ensure quicker heat-up times.
1. Tile/Stone Floor
1
2. Tile Adhesive/
4
4
Self-levelling compound
3
2
5
3. Cable Mat
4. Thermal Insulation
5. Concrete / Timber Floor
visit www.flexel.co.uk for detailed product info & installation tips