Fire Protection Equipment & Supplies Globe Valves for Fire Sprinkler System

TrimFit ® Globe Valve with PTFE
UL/ULC Listed 300 psi
Description
FPPI ® TrimFit ® Bronze* Globe Valves are precision cast then machined using
state of the art facilities. Each valve features a full oating seat holder for
reduced seat wear when closing the valve. Seat is made of pure virgin PTFE for
longer seat life and reduced maintenance as compared to rubber seat valves.
TrimFit trim valves are suitable for use in regular (175psi) and high pressure
(300psi) sprinkler systems. Standard con guration is FNPT x FNPT and is
available in ¼” IPS through 2” IPS sizes. Each valve carries the UL Listing UL/
ULC Listed 2R97
Specifications
Installation
Install in accordance with usual and customary installation techniques for re
sprinkler systems. Use a suitable thread sealant on the male threads of the pipe
being threaded into the valve body. We recommend either FPPI PTFE Thread
Sealing Tape or PipeFit ® Thread Sealing Paste with PTFE. NEVER USE BOTH.
DO NOT OVERTIGHTEN. OVERTIGHTENING MAY CAUSE CRACKS OR
LEAKS.
Material:
Brass* or Bronze*
Seat-PTFE
Hand wheel-JIS FC 20
painted red.
Sizes:
06-798-00 ¼” IPS FNPT
06-800-00 ½”
06-802-00 ¾”
06-804-00 1”
06-806-00 1¼”
06-808-00 1½”
06-810-00 2”
*Contains lead. Not for use in
water systems intended for human
consumption.
3198 LIONSHEAD AVE
CARLSBAD, CA 92010
TEL + 1 760 599-1168 +
1 800 344-1822 FAX + 1
800 344-3775
© 2015 Fire Protection Products, Inc. PipeFit ® , TrimFit ® , and FPPI ® are registered trademarks of Fire
Protection Products, Inc.
WWW.FPPI.COM