Finishes Manufacturer's Product Guide Vol. 1 | Seite 298
QuietZone®
Acoustic Sealant
Product Data Sheet
For information on different wall,
floor and ceiling construction
techniques and performance
values contact your Sales
Representative or contact
Owens Corning at
1-800-GET-PINK.
Product Installation
QuietZone acoustic sealant is
designed for use in all wall and
floor systems to seal gypsum
and other small openings from
plumbing or electrical work, but
can be used in other areas where
a non-hardening sealant is
required.
• Before use, wipe excess dirt,
dust or moisture away from
applicable area to produce a
clean, dry surface
• Cut tip to suggested bead
size and place into gun
• Apply at a 45° angle and,
after 3-5 minutes, “tool”
bead into place
Product Precautions
QuietZone acoustic sealant may
cause irritation to the eyes and
skin and is harmful by inhalation
or if swallowed. Avoid contact
with eyes and skin. Avoid
breathing vapors and ingesting
this product. Keep QuietZone
acoustic sealant away from heat,
sparks, or open flame. Use with
adequate ventilation and wash
thoroughly after handling.
Product Specifications
NET 10.1 FL. OZ. (300ml) and
29 FL. OZ. (857.6 ml)
Rating Scale:
Superior: 5 - Lowest: 1
Paintability: 5
Flexibility: 5
Durability: 5
Adhesion to Wood: 5
Adhesion to Glass: 5
Adhesion to Metal: 5
Adhesion to Masonry: 5
QuietZone
Internal and external uses apply to:
• Wood
• Glass
• Brick
• Concrete
• Masonry
• Drywall
• Aluminum
• Steel
• Plastic
• Tile
• Vinyl
• PVC
• FOAMULAR® Foam Insulation
• Fiber Glass
• Particle Board
• Plywood
• Cement Board
Figure 1
QuietZone 2x4 acoustic wall framing 16” o.c.,
QuietZone acoustic batt insulation and a double
layers of ½” Type X gypsum board.
ne
Zo
iet
Qu
ne
Zo
iet
Qu
Applicable Standards
QuietZone acoustic sealant
exceeds ASTM C 834, Type P,
Grade - 18°C and exceeds
performance requirements of
TT-S-00230C, Type II, Class B
and ASTM C 920, Class 25.
Meets ASTM E-84 Class A.
Always check with your local
building code official regarding
local require