Product Data Sheet
EUROSPAN®
EOS CEILING SYSTEM
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
1.2 The extent of the system is shown on the drawings and
in the schedules.
1.3 Submit samples of each type of system as shown on
the drawings and in schedules and include appropriate
technical information including test data and
maintenance instructions. Submit fabric selector cards
from manufacturer’s standard or custom finishes.
1.4 Components shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of components shall not begin until all wet
work (plastering, concrete, etc.) is completed and dry.
The panels are designed for installation under standard
occupancy conditions from 60°F to 85°F and not more
than 80% relative humidity (RH) in an enclosed building.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions prior to
the system installation, and will furnish all necessary
hardware and accessories for the complete job
installation.
1.7 Substitutions or changes will only be permitted by prior
approval by the architect.
PART 2 MATERIALS
2.1 Eurospan EOS fabric ceiling System shall include the
EOS textile with a light polyurethane coating that can be
cleaned with water or solvent based cleaners.
2.2 Acoustical core shall be constructed of a composite
core construction of 1” thick, medium density glass fiber
core with 12 mil thick face sheet of white/translucent
glass mat thermally bonded to the base core finish
surface. Other glass fiber cores of ½", ¾", 1", 1½", 2", 3",
and 4” thickness; with various densities are available to
meet specific acoustical requirements.
2.5 Acoustical Performance – in accordance with ASTM
C 423 (Type E 400 Mounting) components shall have
a minimum NRC of: .80 (1" thick). In accordance with
ASTM C 423 (Type A Mounting) components shall have
a minimum NRC of: .85 (1" thick) and .95 (2" thick).
2.6 Flammability – All system components shall meet a
25/50 Class A rating in accordance with ASTM E 84.
PART 3 EXECUTION
3.1 Manufacturer’s Instructions – Comply with the
instructi ۜ