Finishes Manufacturer's Product Guide Vol. 1 | 页面 266

Product Data Sheet

SELECTSOUND® BLACK ACOUSTIC BLANKET
INSTALLATION PROCEDURE

Conceptual Details

SelectSound Black acoustic blanket can be installed on
drywall, concrete block or precast
concrete using impaling pins or appropriate adhesives.
When installing insulation with adhesive, follow adhesive
manufacturer’s recommendations for surface preparation
and pattern.
When using impaling pins, follow
the pin manufacturer’s recommendations for surface
preparation, location and amount of pins. Pin length should
be selected to ensure tight fit. Where subject to physical
contact, protect pin tips.
Keep product dry during shipping, storage and installation.
Owens Corning reserves the right to change this product
as needed.
Caution: May cause temporary irritation to skin, eyes
and respiratory tract. Avoid contact with eyes and skin.
Wear long-sleeved, loose-fitting clothing, gloves and eye
protection when handling and applying material. Wash with
soap and warm water after handling. Wash work cloths
separately and wipe out washer.

For CSI type sample specification, please contact your local Owens Corning
representative.

Acoustical Performance
Tested Values - SelectSound Black Acoustic Blanket
Sound Absorption Coefficients (ASTM C 423, Type “A” Mounting)

Product

Density
pcf
kg/m3

Thickness
in
mm

125

Octave Band Frequencies, Hz.
250
500
1000 2000 4000

NRC*

Thermal Resistance1
R-Value (hr•ft 2•°F)/Btu

SelectSound Black 150B

1.5

24

1.0

25

0.08

.025

0.49

0.72

0.86

0.91

0.60

3.8

Acoustic Blanket

1.5

24

1.5

38

0.16

0.36

0.61

0.83

0.90

0.92

0.70

5.8

1.5

24

2.0

51

0.20

0.53

0.79

0.94

0.95

0.97

0.80

7.7

2.0

32

2.0

51

0.20

0.55

0.87

1.00

0.95

0.95

0.85

8.0

1
ASTM C518
These data were collected using a limited sample size and are not absolute values. Reasonable tolerances must therefore be applied. All tests were conducted in accordance
with ASTM C 423, Type A mounting (material placed against a solid backing such as a block wall). Owens Corning Granville Science & Technology Acoustics Lab is National
Voluntary Laboratory Accreditation Program (NVLAP) approved.

CDC CORPORATION
800 Gustafson Road
Ladysmith, Wisconsin 54848
1-800-932-2383
www.conweddesignscape.com
1-800-359-3312
www.walltechnology.com
Pub. No. 10018366. Printed in U.S.A. February 2013.
© 2013 Owens Corning. All Rights Reserved.
LEED is a registered trademark of U.S. Green Building Council.