Installation Instructions
RESPOND® DIFFUSER
The following are guidelines given in good faith to help avoid
common errors. They are not intended to be a step-by-step list
of instructions or a checklist, and it is assumed the installer has
general construction knowledge. Conwed Designscape|Wall
Technology bears no responsibility for any installation actions
taken or not taken, and is not responsible for installer selection.
3.
Install L-Clips at top of diffuser and hook & Loop
brackets at bottom of diffuser with white-headed
pop-rivets. Insert pop-rivet from gel coat side.
4.
Mount 6” wall bar to wall using appropriate fasteners
to secure to wall structure. Top of wall bar should be
located 1/8” below desired height of diffuser. Be sure to
allow a 1” minimum clearance above top of wall bar to
engage L-Clip on wall bar.
5.
Peel off white back of hook & Loop to expose adhesive
and insert L-Clips onto wall brackets. With L-Clips fully
engaged, level and adjust position. Press bottom of
diffuser to wall to adhere hook & loop bracket.
INSPECTION
•
•
Freight Damage: Inspect cartons for obvious damage
before accepting and note on delivery ticket.
Concealed Damage: Notify us of any concealed
damage within 5 business days of receipt. Claims beyond
5 days will be honored at the discretion of Conwed
Designscape|Wall Technology or the freight company.
Do not install products of unacceptable quality. Contact
your area sales representative immediately. We will not be
responsible for installation or removal costs of unacceptable
product.
DIFFUSER INSTALLATION
WALL MOUNTED BARREL AND PYRAMIDAL
DIFFUSERS
L-Clips
Hook & Loop
1.
2.
Using the 6” L-Clips as a template, drill 1/8” pop-rivet
holes in the front, top lip of the diffuser. Holes should be
drilled from the gel coat side and located so the face of
the clip is flush with the ‘lip’ of the diffuser.
Drill 1/8” pop-rivet holes for hook & loop bracket in
similar manner. (Diagrams show locations.)
Small Diffuser Parts List, up to 48” x 48”
2 – 6” Wall Bars
2 – 6” L-Clips
1 – 6” Hook & Loop Bracket
Locate and install as shown: