Product Data Sheet
WEDGE WALL PANELS
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
1.2 The extent of the acoustical panels is shown on the
drawings and in the schedules.
1.3 Submit _______ (select quantity) samples of each type
of acoustical panel as shown on the drawings and in
schedules and include appropriate technical information
including test data and maintenance instructions. Submit
__________ (select quantity) fabric selector cards from
manufacturer’s standard finishes, or designer specified
finishes.
1.4 Acoustical panels shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of acoustical panels shall not begin until
all wet work (plastering, concrete, etc.) is completed
and dry. Building shall be properly enclosed and under
standard occupancy conditions (temperature of
60-85°F and not more than 70% relative humidity)
before installation begins.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions prior to
the acoustical panel installation.
2.3 Sizes: ______ width and _______ high or as shown
on drawings. Standard maximum size is 16 square feet,
with lengths not exceeding 8’, and widths not less than
2’. Custom smaller sizes available; consult manufacturer.
Panels are to be manufactured according to field
dimensions supplied by the installing contractor. Standard
tolerances are ± 1/16” in width and length.
2.4 Edge profile shall be: Square. Corner detail shall be:
Square. Edges will be covered with 1/8” molded