Product Data Sheet
REFLECTIVE WALL PANELS
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
1.2 The extent of the acoustical panels is shown on the
drawings and in the schedules.
1.3 Submit _______ (select quantity) samples of each type
of acoustical panel as shown on the drawings and in
schedules and include appropriate technical information
including test data and maintenance instructions. Submit
__________ (select quantity) fabric selector cards from
manufacturer’s standard finishes, or designer specified
finishes.
1.4 Acoustical panels shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of acoustical panels shall not begin until
all wet work (plastering, concrete, etc.) is completed
and dry. Building shall be properly enclosed and under
standard occupancy conditions (temperature of 60-85°F
and not more than 70% relative humidity) before
installation begins.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions prior to
the acoustical panel installation.
1.7 Substitutions or changes will only be permitted by prior
approval by the architect.
PART 2 MATERIALS
2.1 Acoustical wall panels shall be: Reflective Wall Panels as
manufactured by Conwed Designscape|Wall Technology,
800 Gustafson Road, Ladysmith, WI 54848.
Phone (800) 932-2383, fax (800) 833-4798.
2.2 Reflective Wall Panels shall be constructed of a ¾”
MDO – Medium Density Overlay plywood. Optional
fiberglass-based reflectors will be constructed of a
composite core of dimensionally stable rigid fiberglass
of 6-7 PCF density covered with 1/16” co-polymer of
1-1/16”, 1-9/16”, 2-1/16” or custom thickness ____________
(specify).
2.3 Sizes: ______ width and _______ high or as shown on
drawings. Standard maximum size is 48” wide x 96” high
(nominal) for MDO. Standard maximum is 53” wide x
10’ high for fiberglass-based reflectors. Custom or larger
sizes available; consult manufacturer. Panels are to be
manufactured according to field dimensions supplied by
the installing contractor. Standard tolerances are ± 1/16”
in width and length.
2.4 Edge profile shall be: Square, full bevel, half-bevel,
miter, or custom __________________ (specify).
Corner detail shall be: Square, radius or custom
_______________ (specify).
2.5 Panel finish shall be gel-coat (MDO only) or ________
________________________________ (specify finish
manufacturer, pattern, color and specifier). Finish shall
be applied directly over the face and edges of the panel
and returned to the back to provide a full finished edge.
All corners are fully tailored.
2.6 Standard MDO mounting is Z-bar to Z-bar. Fiberglass
mounting shall be adhesive / resin spots, adhesive no
resin, Impaling / adhesive, spline, VELCRO,® z-clip to
double wall clip, Z-bar to Z-bar, z-clip / VELCRO® or
custom____________ (specify). Adhesive, miscellaneous
fasteners, (i.e. nails, screws, etc.) and additional hanging
hardware are to be supplied by the contractor.
2.7 Flammability – All panel components except MDO
plywood shall have a Class “A” fire rating in accordance
with ASTM E-84.
Thank you for choosing Conwed Designscape|Wall
Technology for your acoustical needs.
The information provided above is correct to the best of our
knowledge at time of printing. We reserve the right to make
changes without prior notification.
DISCLAIMER OF LIABILITY
Technical information contained herein is furnished without charge or obligation and
is given and accepted at recipient’s sole risk. Because conditions of use may vary and
are beyond our control, Owens Corning makes no representation about, and is not
responsible or liable for the accuracy or reliability of data associated with particular uses
of any product described herein. Nothing contained in this bulletin shall be considered
a recommendation.
+YWXEJWSR 6SEH
0EH]WQMXL;MWGSRWMR
T: 1-800-932-2383
F: 1-800-833-4798
www.conweddesignscape.com
4YF2S)4VMRXIH MR 97%%TVMP
3[IRW 'SVRMRK%PP 6MKLXW 6IWIVZIH
0))( MW E VIKMWXIVIH XVEHIQEVO SJ 97+VIIR &YMPHMRK 'SYRGMP