Product Data Sheet
LOADED VINYL PANEL
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
1.2 The extent of the acoustical panels is shown on the
drawings and in the schedules.
1.3 Submit _______ (select quantity) samples of each type of
acoustical panel as shown on the drawings and in schedules
and include appropriate technical information including test
data and maintenance instructions. Submit __________
(select quantity) fabric selector cards from manufacturer’s
standard finishes, or designer specified finishes.
1.4 Acoustical panels shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of acoustical panels shall not begin until all wet
work (plastering, concrete, etc.) is completed and dry.
Building shall be properly enclosed and under standard
occupancy conditions (temperature of 60-85° F and not
more than 70% relative humidity) before installation begins.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions prior to the
acoustical panel installation.
1.7 Substitutions or changes will only be permitted by prior
approval by the architect.
PART 2 MATERIALS
2.1 Acoustical wall panels shall be: Loaded Vinyl Panels as
manufactured by Conwed Designscape|Wall Technology,
Inc., 800 Gustafson Road, Ladysmith, WI 54848.
Phone (800) 932-2383, fax (800) 833-4798.
2.2 Acoustical Panels shall be constructed of a composite core
construction of dimensionally stable rigid fiberglass of 6-7
pcf density, backed by 1/8” Loaded Vinyl barrier, fully adhered
to the fiberglass, (faced with optional 1/8” 16-20 PCF
molded fiberglass). Thickness (choose one) 7/8”, 1-1/8”, 1-5/8”,
2-1/8” or custom. (Add 1/8” to these sizes if optional molded
fiberglass face is required.)
2.3 Sizes: ______ width and _______ high or as shown on
drawings. Standard maximum size is 48” wide x 120”
high (nominal). Custom or larger sizes available; consult
manufacturer. Panels are to be manufactured according
to field dimensions supplied by the installing contractor.
Standard tolerances are ± 1/16” in width and length.
2.4 Edge profile shall be: Square, radius, bevel, miter, or custom
__________ (specify). Corner detail shall be: Square, radius
or custom __________ (specify). Edge treatment shall be:
resin hardened, aluminum or high-pressure laminate (with
square edge only), wood (all profiles available) or custom
__________ (specify).
2.5 Panel finish shall be ______________________________
__________ (specify finish manufacturer, pattern, color and
specifier). Finish shall be applied directly over the face and
edges of the panel and returned to the back of the panel
to provide a full finished edge. All corners are fully tailored.
2.6 Mounting shall be: perimeter adhesive, Z-clip or concealed
splines for walls, and Z-bar to Z-bar on ceilings. (Circle
one). Adhesive, miscellaneous fasteners, (i.e. nails, screws,
etc.) and standard continuous wall leveling angle are to be
supplied by the contractor.
2.7 Acoustical Performance – panels shall have a minimum
NRC of _____ (please specify) in accordance with ASTM
C-423 (Type “A” Mounting).
2.8 Flammability – All panel components except the loaded
backing shall have a Class “A” fire rating in accordance with
ASTM E-84. Loaded backing must pass UL 94.
Thank you for choosing Conwed Designscape|Wall
Technology for your acoustical needs.
The information provided above is correct to the best of our
knowledge at time of printing. We reserve the right to make
changes without prior notification.
DISCLAIMER OF LIABILITY
Technical information contained herein is furnished without charge or obligation and is
given and accepted at recipient’s sole risk. Because conditions of use may vary and are
beyond our control, Owens Corning makes no representation about, and is not responsible
or liable for the accuracy or reliability of data associated with particular uses of any product
described herein. Nothing contained in this bulletin shall be considered a recommendation.
+YWXEJWSR 6SEH
0EH]WQMXL;MWGSRWMR
T: 1-800-932-2383
F: 1-800-