Product Data Sheet
SKYWAY™ CEILING CLOUDS
TYPE II
an alternate attachment for wire or cable (provided by
others). Use of T-grid can sometimes reduce the number
of wires or cables required.
ACOUSTICAL PERFORMANCE
Skyway Ceiling Clouds Type II provide excellent acoustical
performance for auditoriums, theaters, offices, libraries,
classrooms; virtually anywhere sound absorption is required.
Thickness
1-1/8”
2-1/8”
APPLICATION
Conwed Designscape|Wall Technology Skyway Curved
Ceiling Clouds Type II are designed as an accent ceiling
element in areas requiring excellent acoustical absorption.
Clouds are typically provided painted, unpainted
(Foundations finish, which can be job-site painted if
desired)**, and many fine fabric finishes are also available.
CONSTRUCTION
Panels are custom-curved from the factory with a
dimensionally stable 6-7 PCF glass fiberboard core
laminated face and back with 16-2 0 PCF 1/8” molded
fiberglas. Curvature varies slightly; abutting curved edges is
not recommended. Finishes are completely adhered to all
surfaces which aids when minor field-cutting is required.
SIZE AVAILABILITY
NRC
0.90
1.10
The noise reduction coefficients were derived from tests
conducted according to ASTM C 423 on a Type F5 mounting
by a NVLAP accredited laboratory.
FIRE PERFORMANCE
Each component has been tested according to ASTM E 84*
and has Class I/A rating
RECYCLED CONTENT
Skyway Ceiling Clouds Type II utilize an Owens Corning
fiberglass board core that is eligible to bear the Green Cross
label for recycled content. The board is certified on average
to contain at least 57% pre-consumer recycled content and
5% post-consumer content. And for your LEED® project, our
acoustical panels can help you qualify for recycled content
points under the Materials and Resources section. Other
LEED® categories may also apply depending upon the
project requirements.
Available thicknesses are 1-1/4” and 2-1/4”. Our standard
maximum size is 4’ x 10’. Minimum curvatures are 10’ radius.
Custom panels and radius’ are available; consult manufacturer.
EDGE DETAIL
All edges are square and resin hardened
FINISH
• Foundations is a factory-finished proprietary white,
acoustically transparent covering with a ‘soft drywall’ look.
This can be field painted with a light spray application.
• Factory painted finish. White is standard and custom colors
are available
• A wide variety of fabrics are available from all major
brands including Guilford, Maharam, Knoll, Carnegie and
Designtex.
MOUNTING
• Acoustical anchors field applied to factory-marked resin
spots provide anchor points for wire or cable (provided by
others). Panels up to 48” x 75” require 4 anchors; larger
panels consult factory.
• T-grid field attached to factory-marked resin spots provide
Warranty
3-YEAR WARRANTY
Skyway Ceiling Clouds Type II have a limited 3-year warranty.
The panels are warranted to be free from defects in material
and workmanship for a period of three years from the date
of purchase.
See product warranty for details and limitations.
* The ASTM E 84 standard should be used to measure and describe the properties
of materials, products or assemblies in response to heat and flame under controlled
laboratory conditions and should not be used to describe or appraise the fire hazard
or fire risk of materials, products or assemblies under actual fire conditions. However,
results of this test may be used as elements of a fire risk assessment, which takes into,
account all of the factors, which are pertinent to an assessment of the fire hazard of a
particular end use. Values are reported to the nearest 5 rating.
** See field painting instructions.