Product Data Sheet
SKYWAY™ CEILING CLOUDS
TYPE I
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
2.3 Sizes: ____ width and _____high or as shown on drawings.
Standard maximum is 48” x 120”. Custom shapes are
available. Panels are to be manufactured according to field
dimensions supplied by the installing contractor. Standard
tolerances are ± 1/16” in width and length.
1.2 The extent of the acoustical panels is shown on the
drawings and in the schedules.
2.4 Edge profile shall be square, bevel (1/2” or more) or
custom__________(specify). Corner detail shall be Square
or radius
1.3 Submit _______ (select quantity) samples of each type
of acoustical panel as shown on the drawings and in
schedules and include appropriate technical information
including test data and maintenance instructions. Submit
__________ (select quantity) fabric selector cards from
manufacturer’s standard finishes, or designer specified
finish.
2.5 Panel finish shall be ___________________________
______________ (specify finish manufacture, pattern
color and specifier). Finish shall be applied directly over
the face and edges and returned to the back to provide
a full finished edge. All corners are fully tailored. Optional
backing includes fabric or scrim (specify).
1.4 Acoustical panels shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of acoustical panels shall not begin until all wet
work (plastering, concrete, etc.) is completed and dry.
Building shall be properly enclosed and under standard
occupancy conditions (temperature of 60-85° F and not
more than 70% relative humidity) before installation begins.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions &