Product Data Sheet
SKYWAY™ CEILING CLOUDS
TYPE I
• T-grid field attached to factory-marked resin spots provide
an alternate attachment for wire or cable (provided by
others). Use of T-grid can sometimes reduce the number
of wires or cables required.
ACOUSTICAL PERFORMANCE
Skyway Ceiling Clouds Type I provide excellent acoustical
performance for auditoriums, theaters, offices, libraries,
classrooms;virtually anywhere sound absorption is required.
APPLICATION
Conwed Designscape|Wall Technology Skyway Ceiling Clouds
Type I are designed for a large variety of applications ranging
from single or double panel accents up to large multi-panel
ceiling areas. Use in areas requiring excellent acoustical
absorption. Clouds are typically provided painted (Subtle
Texture finish),unpainted (Soft Texture finish…which can be
job-site painted if desired)**, and many fine fabric finishes
are also available.
Thickness
1-1/8”
2-1/8”
NRC
0.90
1.10
The noise reduction coefficients were derived from tests
conducted according to ASTM C 423 on a Type F5 mounting
by a NVLAP accredited laboratory.
FIRE PERFORMANCE
Each component has been tested according to ASTM E 84*
and has Class I/A rating
CONSTRUCTION
RECYCLED CONTENT
Panels are produced with a dimensionally stable 6-7 PCF
glass fiberboard core laminated with 16-20 PCF 1/8” molded
fiberglass face. Finishes are completely adhered to all surfaces.
Skyway Ceiling Clouds Type I utilize an Owens Corning
fiberglass board core that is eligible to bear the Green Cross
label for recycled content. The board is certified on average
to contain at least 57% pre-consumer recycled content and
5% post-consumer content. And for your LEED® project, our
acoustical panels can help you qualify for recycled content
points under the Materials and Resources section. Other
LEED® categories may also apply depending upon the
project requirements.
SIZE AVAILABILITY
Available thicknesses are 1-1/8”, 1-5/8” and 2-1/8”. Our
standard maximum size is 4’ x 10’. Custom shapes available.
Returned edges are available to simulate thickness and hide
attachment hardware, consult manufacturer.
EDGE DETAIL
All edges are resin hardened. Available shapes include square
and bevels of ½” or more. Kerfed edges are often used
between panels for alignment using splines or ceiling grid.
FINISH
• Soft Texture is a factory-finished proprietary white,
acoustically transparent covering with a ‘soft drywall’ look.
This can be field painted with a light spray application.
• Subtle Texture is a factory painted finish. White is standard
and custom colors are available
• A wide variety of fabrics are available from all major
brands including Guilford, Maharam, Knoll, Carnegie and
Designtex.
MOUNTING
• Acoustical anchors field applied to factory-marked resin
spots provide anchor points for wire or cable (provided by
others).
WARRANTY
3-YEAR WARRANTY
Skyway Ceiling Clouds Type I have a limited 3-year warranty.
The panels are warranted to be free from defects in material
and workmanship for a period of three years from the date
of purchase.
See product warranty for details and limitations.
* The ASTM E 84 standard should be used to measure and describe the properties
of materials, products or assemblies in response to heat and flame under controlled
laboratory conditions and should not be used to describe or appraise the fire hazard
or fire risk of materials, products or assemblies under actual fire conditions. However,
results of this test may be used as elements of a fire risk assessment, which takes into,
account all of the factors, which are pertinent to an assessment of the fire hazard of a
particular end use. Values are reported to the nearest 5 rating.
**See field painting instructions.