Product Data Sheet
RESPOND® REFLECTOR
CEILING CLOUDS, FLAT
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
1.2 The extent of the acoustical panels is shown on the
drawings and in the schedules.
1.3 Submit _______ (select quantity) samples of each type of
acoustical panel as shown on the drawings and in schedules
and include appropriate technical information including test
data and maintenance instructions. Submit __________
(select quantity) fabric selector cards from manufacturer’s
standard finishes, or designer specified finishes.
1.4 Acoustical panels shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of acoustical panels shall not begin until all wet
work (plastering, concrete, etc.) is completed and dry.
Building shall be properly enclosed and under standard
occupancy conditions (temperature of 60-85° F and not
more than 70% relative humidity) before installation begins.
2.3 Sizes: ______ width and _______ high or as shown on
drawings. Standard maximum size is 48” wide x 120”
high (nominal). Custom or larger sizes available; consult
manufacturer. Panels are to be manufactured according
to field dimensions supplied by the installing contractor.
Standard tolerances are ± 1/16” in width and length.
2.4 Edge profile shall be: Square, full bevel, half-bevel, miter, or
custom __________________ (specify). Corner detail shall
be: Square, radius or custom _____________ (specify).
2.5 Panel finish shall be gel-coat or ______________________
__________________ (specify finish manufacturer, pattern,
color and specifier). Finish shall be applied directly over the
face and edges of the panel and returned to the back to
provide a full finished edge. All corners are fully tailored.
2.6 Standard mounting is Cloud Angle for Flat Reflectors,
and Reflector Hardware for Hinged panels. Adhesive,
miscellaneous fasteners, (i.e. nails, screws, etc.) and
additional hanging hardware are to be supplied by the
contractor.
2.7 Flammability – All panel components except MDO
Plywood shall have a Class “A” fire rating in accordance
with ASTM E-84.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions prior to the
acoustical panel installation.
Thank you for choosing Conwed Designscape|Wall
Technology for your acoustical needs.
1.7 Substitutions or changes will only be permitted by prior
approval by the architect.
The information provided above is correct to the best of our
knowledge at time of printing. We reserve the right to make
changes without prior notification.
PART 2 MATERIALS
DISCLAIMER OF LIABILITY
Technical information contained herein is furnished without charge or obligation and is
given and accepted at recipient’s sole risk. Because conditions of use may vary and are
beyond our control, Owens Corning makes no representation about, and is not responsible
or liable for the accuracy or reliability of data associated with particular uses of any product
described herein. Nothing contained in this bulletin shall be considered a recommendation.
2.1 Acoustical Ceiling Clouds shall be: Reflector Ceiling Clouds
as manufactured by Conwed Designscape|Wall Technology,
800 Gustafson Road, Ladysmith, WI 54848.
Phone (800) 932-2383, fax (800) 833-4798
2.2 Reflector Ceiling Clouds shall be constructed of a MDO
– Medium Density Overlay plywood and may be backed
by dimensionally stable rigid fiberglass of 6-7 pcf. MDO
thickness (choose one) ½” or 3/4”. Optional fiberglass
thickness of 1”, 1-½”, 2”, 3”, 4” or custom ___________
(specify).
+YWXEJWSR 6SEH
0EH]WQMXL;MWGSRWMR
T: 1-800-932-2383
F: 1-800-833-4798
www.conweddesignscape.com
4YF2S %4VMRXIH MR 97%%TVMP
3[IRW 'SVRMRK%PP 6MKLXW 6IWIVZIH
0))( MW E VIKMWXIVIH XVEHIQEVO SJ 97+VIIR &YMPHMRK 'SYRGMP