Product Data Sheet
GRIDLOCK CEILING PANELS
PART 1 GENERAL
1.1 Work in this section shall be subject to drawings, general
conditions, schedules, addenda and other contract
documents.
1.2 The extent of the acoustical panels is shown on the
drawings and in the schedules.
1.3 Submit
(select quantity) samples of each type of
acoustical panel as shown on the drawings and in schedules
and include appropriate technical information including test
data and maintenance instructions.
Submit
(select quantity) fabric selector cards
from manufacturer’s standard finishes, or designer specified
finishes.
1.4 Acoustical panels shall be installed according to
manufacturer’s recommendations and instructions.
1.5 Installation of acoustical panels shall not begin until all wet
work (plastering, concrete, etc.) is completed and dry.
Building shall be properly enclosed and under standard
occupancy conditions (temperature of 60-85°F and not
more than 70% relative humidity)
before installation begins.
1.6 The contractor shall be responsible for the examination
and acceptance of all surfaces and conditions prior to the
acoustical panel installation.
1.7 Substitutions or changes will only be permitted by prior
approval by the architect.
PART 2 MATERIALS
2.1 Acoustical ceilings shall be: Gridlock ceiling panels as
manufactured by Conwed Deisgnscape|Wall Technology,
800 Gustafson Road, Ladysmith, WI 54848.
Phone (800) 932-2383, fax (800) 833-4798.
2.5 Panel finish shall be: Foundations
(please
specify white or black). New Dimensions acoustically
transparent finish, which is applied over an acoustically
transparent membrane.
(please specify
color). Fabric
(please specify
fabric manufacturer, pattern, color and specifier). Finish shall
be applied directly over the face and edges of the panel to
provide a full finished edge. All corners are fully tailored.
2.6 Mounting shall be: Lift-and-Shift Interlocken 2.0 mounting.
Adhesive, miscellaneous fasteners, (i.e. nails, screws, etc.)
and standard continuous wall leveling angle are to be
supplied by the contractor.
2.7 Acoustical Performance – panels shall have a minimum
NRC of
(please specify) in accordance with ASTM
C-423 (Type “E400” Mounting).
2.8 Flammability – All panel components shall have a Class “A”
rating in accordance with ASTM E-84.
Thank you for choosing Conwed Designscape|Wall Technology
for your acoustical needs.
The information provided above is correct to the best of our
knowledge at time of printing. We reserve the right to m