Product Data Sheet
RESIST PANELS
MOUNTING
Standard mountings include spot and perimeter adhesive, Z-clip,
concealed splines, impaling clips, hook & loop, and magnetic
fasteners. Z-Bar to Z-Bar is recommended for ceilings.
ACOUSTICAL PERFORMANCE
Resist Acoustical Wall Panels provide excellent acoustical
performance for gymnasiums and multi-purpose areas, and
virtually anywhere sound absorption is required.
FIRE PERFORMANCE
Each component has been tested according to ASTM E 84* and
has a Class I/A rating.
WARRANTY
APPLICATION
Conwed Designscape|Wall Technology Resist Acoustical Wall
Panels are designed for gymnasiums and multi-purpose areas.
The resilient fiberglass core springs back on impact to resist
permanent deformation. This is an economical approach to
sound absorption and abuse resistance.
CONSTRUCTION
The core construction is a dimensionally stable 6 PCF resilient
fiberglass board with optional resin hardened edge protection.
Classic construction: unhardened edges combined with a nonwoven ribbed polyester fabric wrap. Finishes are completely
adhered to the face of the panel and returned to the back for
a full finished edge. All corners are fully tailored.
SIZE AVAILABILITY
Available thicknesses are 1-1/8” and 2-1/8”. Widths are up to 48”,
and lengths to 10’. Sizes up to 60” x 120” are available in some
non-classic fabrics.
EDGE DETAIL
In the classic construction with Whispertex fabric, edges are
unhardened; however resin hardened edges are available in
other fabrics. Available choices include: square, radius, bevel,
half bevel, and radius corners.
FINISH
Classic Resist finish is Whispertex Plisse, a ribbed non-woven
fabric (shown). Other finishes of choice include Whispertex
Coppersmith, which is not ribbed, and Guilford 2100.
3-YEAR WARRANTY
Resist Acoustical panels have a limited 3-year warranty starting
from date of purchase. The panels are warranted to be free
from defects in material and workmanship.
See product warranty for details and limitations.
* The ASTM E 84 standard should be used to measure and describe the properties
of materials, products or assemblies in response to heat and flame under controlled
laboratory conditions and should not be used to describe or appraise the fire hazard or
fire risk of materials, products or assemblies under actual fire conditions. However, results of
this test may be used as elements of a fire risk assessment, which takes into, account all of
the factors, which are pertinent to an assessment of the fire hazard of a particular end use.
Values are reported to the nearest 5 rating.