Field Installation and Service Manual IMS125 - Page 4
Adjusting a Door
The available movements in these hinges are performed by adjusting cam and clamp screws located in the
hinge and mounting plates.
Up and Down movement is achieved by loosening the two screws that attach the mounting plate to the cabinet.
Once the screws are loose, slide the mounting plate up or down against the cabinet as needed and retighten.
Side to Side adjustment of a door is achieved by turning the front screw on the hinge arm.
In and Out movement is performed by turning the cam screw at the back of the hinge arm.
Keep in mind that these adjustments are performed with the door in an open position and are not evident until
the door is closed.
Out of Alignment
Up and Down
Side to Side
In and Out
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 125