Field Installation and Service Manual IMS124 | Page 5

2.2
Place Screws
Partially open each door and drawer and insert
screws into each of the holes.
2.3
Install Hardware
Hold the hardware over the ends of the screws and spin the
screws in carefully with a screw gun, closing the doors and
drawers as they are finished.
124
2.4
In the event of hardware that requires two screws, lightly engage the first screw without tightening until the
second screw is started.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 124
5