Field Installation and Service Manual IMS119 | Page 3

1.3
1.2
When installing a Corbel
to a fi nished panel or decorative
panel, use 1-1/4” nails through its
back fl ange.
Corbels must be fastened with screws to the rough top of a cabinet.
Predrill through the rough top at the Corbel positions and screw into the Cor-
bels with #7 x 1-1/8” fl athead screws.
Confi rm that the Corbel is fastened perpendicular to the cabinet or wall.
Step 2
119
Installing Posts
2.1
Posts should be
cut to fi t snug be-
tween the leveled
rough top and the
fl oor.
Cut the Post to
fi t and test that
the Post will fi t
snug between
the fl oor and the
rough top, but not
defl ect the rough
top out of level.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 119
3