Field Installation and Service Manual IMS115 | Page 7

Step 6
Trim In
6.1
Use a Trim-in router when possible to trim away any excess material, followed with a fi le. If the material is
thin enough, such as Edgeband, it can be trimmed with a sharp razor knife (a drywall knife with a fresh blade).
115
6.2
Trimmed edges are often a
bit rough.
Use a crosscut fi le or sandpaper to
smooth the edges of the applied skin
or edgeband.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 115
7