Field Installation and Service Manual IMS109 | Page 4

Step 1
Installing Light Rail Molding
Light Rail Screw Placement
1.1
Light Rail Molding must
be attached to the bottom of the
wall cabinets with screws.
Simple profi les should be
screwed through the bottom
deck with #7 x 1-5/8” fl athead
screws.
Side View
#7 x 1-5/8”
Flathead screw
If the molding is an “L-shaped”
profi le, it should be screwed
through the Attach Cleat.
In this case, predrill and counter-
sink the attach cleat with 3/16”
clearance holes and drive
#7 x 1-1/8” screws from below.
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
AMLR2
Light Rail
Predrill
3/16” Countersunk
Clearance Hole for
#7 x 1-1/8”
Flathead Screw
AMLR5
Light Rail
Section 1: IMS 109
4