Field Installation and Service Manual IMS105 - Page 6

Step 2 Calculate and Cut the Bottom Corner Filler 2.1 Once Cabinet 1 and the verti- cal Corner Filler pair is secured in place, identify the corner drywall con- dition by placing the Bottom Corner Filler blank in place and squaring it to Cabinet 1 with a framing or combo square. Typical Corner Drywall Condition W3036 Bottom Corner Filler Figure 1 Scribe the wall condition onto the Bottom Corner Filler. 2.2 Cut the scribe lines on the Bottom Corner Filler and refi t to the wall. W3036 Bottom Corner Filler Scribed to Fit Wall Condition Ideally, the Bottom Corner Filler is still square to Cabinet 1. Figure 2 Trace lines onto Bottom Corner Filler W3036 2.3 Using a carpenters square in place of where Cabinet 2 will be installed, scribe the lines of the fi ller space onto the Bottom Corner Filler blank. Figure 3 2.4 Cut the Bottom Corner Filler to the lines. Remove the side portion fi rst and then the notch area. Figure 4 ©2017 PCS Professional Cabinet Solutions. All Rights Reserved. Section 1: IMS 105 6