Field Installation and Service Manual IMS104 - Page 8

Dealing With Adverse Conditions
If wall conditions make it diffi cult to line up the faces of the cabinet boxes , or the boxes do not plumb from the face , it may be necessary to shim the back of a single or several cabinets in order to achieve a fl ush and plumb condition .
Examine the following diagrams that show exaggerated bad wall conditions and how shims can be applied to correct the conditions .
Correcting for a “ Bowed In ” or “ Bellied ” Wall Condition
W3036
W3036
W3036
Boxes are at an angle to each other
Box faces are not aligned
W3036 W3036
W3036
Proper shimming will allow cabinet boxes to be aligned along a flat plane and the door facia to be adjusted within acceptable tolerances
© 2017 PCS Professional Cabinet Solutions . All Rights Reserved . Section 1 : IMS 104 8
Dealing With Adverse Conditions If wall conditions make it diffi cult to line up the faces of the cabinet boxes, or the boxes do not plumb from the face, it may be necessary to shim the back of a single or several cabinets in order to achieve a fl ush and plumb condition. Examine the following diagrams that show exaggerated bad wall conditions and how shims can be applied to correct the conditions. Correcting for a “Bowed In” or “Bellied” Wall Condition W3036 W3036 Boxes are at an angle to each other W3036 W3036 Box faces are not aligned W3036 W3036 )Aɽȁ͡ݥ܁Ё́ѼЁ)ѡȁѼѕݥѡхѽɅ+ ܁A LAɽͥ ЁMѥ̸ÍI͕ٕ)Mѥ%5L(