Field Installation and Service Manual IMS103 - Page 2

Field Installation and Service Manual SECTION 1 - INSTALLATION Installing Tall Cabinets Illustrated Method Sheet 103 Step 1 Prep and Place Tall Cabinets 1.2 The procedure described in this Illustrated Method Shee t assumes the Base and Wall Cabinet Index Lines have been drawn from the Highpoint on the fl oor, stud edges have been located and the cabinet locations for the entire installation have been identifi ed. 1.1 Confi rm Tall Cabinet doors and frames are removed and neatly stored out of the way. The tall cabinets are the fi rst cabinets to be placed and secured in a typical installation. Inattention to detail at this point will affect the entire installation. ©2017 PCS Professional Cabinet Solutions. All Rights Reserved. Measure up 34-1/2” from the bottom of the side of the Tall Cabinet that will be attached to other Wall and Base Cabinets. Make a small mark at this dimension along the back edge of the side panel. 1.3 Identify the loca- tion on the wall where the edge of the Tall Cabinet will align. There should be a plumb line lightly drawn on the wall at that point from the layout process. Slide the Tall Cabinet into position against the wall. Section 1: IMS 103 2