Field Installation and Service Manual IMS102 | Page 6
Step 3
Drawing The Wall Cabinet Index Line
The Wall Cabinet Index Line is the exact location where the wall cabinet box bottoms will align in height along a
wall.
This dimension is not usually given in the plans, but is determined by subtracting the height of the wall cabinet
boxes from the “Uppers @” dimension that is in the plans.
3.1
Determine the height of the Wall Cabinet Index Line from the plans.
In this example,
30” uppers (wall cabinets) @
Wall Cabinet Index Line
-
=
87”
87”
30”
57”
W
2 x 15" Do
33
30-GAS-RANGE1
30" Range
30" MicroHood Above
Heat Deflectors
2 x (AMHD)
w/ RTF Doors Only
Calculating the Wall Cabinet Index Line using
the “Uppers @” Dimension from the Plans
B18-R
B18-L
MW.HOOD
W3015
30”
W3030
The Wall Cabinet Index Line will be marked at 57” above the location of the highpoint of the fl oor.
Kitchen
Soffit Ht. = 90"
Uppers @ 87"
Shadow Molding
No Light Rail
87”
5/8" Panel
(AP2435)
AF630
BDD33
57”
59"
5/8" Back Panels (2 x AP4835)
Corner Molding (AMOC)
Batten Molding (AMB)
©2017 PCS Professional Cabinet Solutions. All Rights Reserved.
Section 1: IMS 102
6