MAVLAB PTY LTD
Date of Issue:
December 2012
MATERIAL SAFETY DATA SHEET
FIDO’S HYDROBATH FLUSH
Inhaled:
Advice to Doctor:
Page 2 of 5
Remove from source of exposure
Treat symptomatically.
SECTION 5 FIRE FIGHTING MEASURES
Flammability:
Suitable extinguishing media:
Hazards from combustion products:
Special protective precautions
and equipment for fire fighters:
Product is considered to be non combustible
No specific requirements. Use extinguishing media suitable for the
surrounding fire.
Heat may produce small amounts of toxic vapours, and the containers
may burn.
Self contained breathing apparatus and chemical resistant suits are
recommended, depending on the size of the fire and the involvement of
this product.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Emergency procedures:
Methods and materials for
containment and clean up:
Contain spillage with inert absorbent material. Exercise care when
working around spillages as surfaces will become slippery.
Absorb spilled material with inert absorbent material such as fine sand,
clay, vermiculite etc and collect in containers for disposal. Dispose of
collected material in accordance with local authority instructions.
SECTION 7 HANDLING AND STORAGE
Precautions for safe handling:
Conditions for safe storage,
including any incompatibilities:
Contamination of surfaces will result in them becoming very
slippery. Avoid contamination of surfaces with this product.
Store below 30oC (Room Temperature)
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
National exposure standards:
None allocated
Biological limit values:
None allocated
Engineering controls:
Not considered necessary during normal usage.
Personal protective equipment:
The following Safety Directions have been set by the Office of Chemical Safety (OCS) as part of the assessment of
this product for registration by the Australian Pesticides & Veterinary Medicines Authority (APVMA). (FAISD
Handbook, Handbook of First Aid Instructions, Safety Directions, Warning Statements, and General Safety
Precautions for, Agricultural and Veterinary Chemicals):
Will damage the eyes and will irritate the skin. Repeated exposure may cause allergic disorders. Avoid contact with
eyes and skin. When opening the container and preparing the disinfectant solution wear cotton overalls buttoned to
the neck and wrist and washable hat and elbow-length PVC gloves and goggles. When using the disinfectant
solution wear elbow-length PVC gloves and goggles. If product on skin immediately wash area with soap and water.
If product in eyes, wash it out immediately with water. Wash hands after use. After each days use, wash gloves,
goggles and contaminated clothing.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Odour:
MSDS version:
Date of Revision:
Update of section:
Pale blue clear slightly viscous liquid.
Mint fragrance
4
December 2012
All sections reviewed