Technical Specifications
WATER
AIR( For pneumatic models)
PUMPS
PRODUCT / WATER VALVES
Pressure in dynamic range
Flow rate range Inlet connection Maximum temperature Recommended hardness
Booster tank
Water Pressure Regulator Working pressure Air intake Average consumption Air entrainment Condensation filter
Number
Flow rate( with water)
Body Membranes Non return valves Voltage Body Closure piston O-rings
Value
1.5 bar( min)- 3 bar( max) Not included. Supplied on request. Recommended. min 2 / l per min- max 10 / l per min Barb 10mm < 30 ° C < 8 ° dH Not included. Supplied on request. Recommended. Included 4 bar 10 mm 140 l / m Optional Integrated 1 pump per channel. Main channel: electric diaphragm( depending on setup) Pneumatic double diaphragm pump( depending on setup) 1.5 litres / minute( Electric) 2.5 litres / minute( Pneumatic) PVDF PTFE PVDF / FFKM 24VDC PP PTFE FFKM
Standard measuring principle Paddles and Hall effect sensor.
FLOW SENSOR
DOSING
Signal Body O-rings Paddles
Alternative
Distribution Outlet barb diameter Outlet barb material Built-in tubes Recommended pipes for installation
24 VDC PNP PP FFKM PVDF * Oval gear not included. Supplied on request. Recommended with chemicals 180cP or higher. External distributor 10 mm PVDF EVA tube 10x16 mm & PTFE 10x12mm Braided( UK & US) PVC 10x16
T + 44( 0) 1273 513566 E sales @ brightwell. co. uk W brightwell. co. uk Unit 9, Euro Business Park, Estate Road, Newhaven, East Sussex BN9 0DQ All information in this data sheet is correct at the time of printing and is subject to change without notice.
Revision 1.7 05 / 2025 B1076EN