1
Dual mass flywheel inspection tool with angular degree
disc and dial gauge
• Required for the proper and quick wear test of the dual mass
flywheel degree (ZMS)
• The test may be performed on the vehicle when the clutch is
removed
• The clearance angle is checked via the number of teeth or degree wheel (rotation of the secondary disc to the primary disc
until the onset of the spring pressure) and the tilting tolerance
via the dial gauge (axial bearing clearance)
• The dual mass flywheel must be checked with every clutch
replacement
• Without verification, there is the risk of damaging the new
clutch assembly, gearbox or the drive train
• A great deal of saved time
• For quick, precise and professional work
• Sturdy design
• In durable plastic storage case
2
Retaining bracket set
Precision inner bearing extraction set Ø 10 - 30 mm
• For holding the pre-tensioned clutch pressure plate during
assembly and disassembly of the clutch
• Sturdy design
• Includes 8 collets Ø 10 - 30 mm
• Slotted shaft
• For the quick and clean replacement of close fitting pilot/guide
bearings
• Universally applicable
• Extremely robust spindle with inductively hardened thread
• Special steel
Application range: Opel with front-wheel drive
3
4
5
6
Application range: Volkswagen, Audi, Seat, Škoda,
Mercedes, etc.
7
8
9
150.2437 3 pcs
Retaining bracket set
10
83
Pre-tension jack
11
• For clutch pressure plates
• No distortion of the clutch pressure plates
• Special steel
660.0009 11 pcs
Application range: Opel/Saab
Dual mass flywheel inspection
150.2425 17 pcs tool with angular degree disc and
dial gauge
consists of:
3.90
13
660.0129 Expanding mandrel 5 mm
consists of:
315
660.0131 Expanding mandrel 6 mm
150.2427 Spacer screw M6 (2 pieces)
150.2430 Union nut M8 (4 pieces)
150.2431 Threaded pin M8 x 80 (pointer)
150.2432 Measurement stand
160
515.1196 Angular degree disc
400
300.0560 Dial test indicator, 0-10mm
260
160,0
150.2399
2.86
137
660.0139 Precision internal extractor collet Ø 27 mm
414
150.2433 Flywheel locking tool (2 pieces)
92
660.0138 Precision internal extractor collet Ø 25 mm
60
84
660.0137 Precision internal extractor collet Ø 20 mm
40
65
660.0136 Precision internal extractor collet Ø 17 mm
80
52
660.0135 Precision internal extractor collet Ø 15 mm
60
150.2429 Spacer screw M8 (2 pieces)
44
660.0134 Precision internal extractor collet Ø 12 mm
60
150.2428 Spacer screw M7 (2 pieces)
850
660.0133 Precision internal extractor collet Ø 10 mm
1100
360
660.0132 Striking weight
150.2426 Lever with protective handle
12
Precision inner bearing extraction set
1.92
Ø 10 - 30 mm
159
660.0141 Precision internal extractor collet Ø 30 mm
180
14
15
16
17
GENERAL CLUTCH TOOLS
18
Auxiliary assembly ring
Clutch cable bracket
• Before removing the clutch, the self-adjusting clutch cable is
to be secured with the bracket
• Allows the use of the old clutch cable
• Without the use of this bracket, the clutch cable can no longer
be used following disassembly
• Sturdy design
Flywheel holding key
• In order to secure the pre-tensioned diaphragm spring to the
clutch pressure plate
• for Ø 110-140 mm
• Plastic
• To lock the flywheel
• Required for the removal and installation of disc flywheels,
clutch pressure plates and belt pulleys
• Sturdy design
Application range: Opel and Saab
Application range: Opel with front-wheel drive
19
20
Application range: Volkswagen Golf starting in the 1989 year
of manufacture
21
22
23
24
25
150.2436
73,0
76
150.2434
110-140
10.0
100
150.2438
255.0
26.0
26.0
26
500
477
GD_KP_$KT-K14-$KP-AUTO-KUPPLUNG_#SALL_#APR_#V1.indb 477
27.03.2015 13:08:40
i