12-42 V detector for locating short circuits, cable breaks
and leakage current
RELAY TESTER
12 V relay tester
• Simple, quick and professional testing of vehicle relay
• Easy handling
• Detection of defective relay through fully automatic test
• The result is signalled via a red or green light
• Contact resistance of 200 milliohm/0.2 ohm
• Applicable with 12 V
• Sturdy ABS plastic
• For the quick, easy and proper searching for short circuits,
cable faults and leakage current without having to puncture
wires
• Saves a great deal of time, because removing interior lining,
carpeting and trim on the vehicle can be reduced to the
essentials
• Short circuiting is eliminated
• For tracking cable guides
• For locating electrical components in the vehicle
• For detecting broken circuits or cable breaks
• For locating the cause of severe battery charge losses
• For testing and detecting temporarily interrupted connections
(“loose connections”)
• The transmitter is connected to the circuit to be tested with
the insulated crocodile clamps via the fuse box
• The output signal is received by the receiver and indicated
acoustically as well as through a directional LED
• The error can be localised by following the line
• If the receiver no longer receives a signal, the short circuit has
been found
• The transmitter can be optionally expanded to include headphones via the built-in port
• Can be used for circuits from 12 V to 42 V
• The detection sensitivity can be variably adjusted
• Includes 2 x 9 V block battery
• In plastic bag
Test lamp 6 - 24 V
• Probe protected by a cap
• Ideal for helping to locate short circuits and breaks
• With shielded crocodile clamp
• Cable with shielded crocodile clamp
• Stainless steel probe
• Brass housing and cap
550.1504
125.0
30
Voltage tester 3 - 48 V
• Universal test instrument for motor vehicle electrics and
electronics
• Two light-emitting diodes indicate voltage as well as polarity
• Test tip with push mechanics to tap into the cable
• With shielded crocodile clamp
12 V relay tester
150.1755
290
KEY TESTER
12 V infrared and high frequency key tester
• Easy, quick and professional testing of infrared and radio (433
+ 868 MHz) keys
• The keys should be checked at each inspection or servicing,
because a new battery or a flashing LED is no guarantee for
100% functionality
• Easy handling
• The result is signalled via a light or sound
• Applicable with 12 V
• Includes 9 V block battery
• Sturdy ABS plastic
550.1503
150.3075 2 pcs
12-42 V detector for locating short
circuits, cable breaks and leakage
current
400
140.0
70
Insulated universal voltage tester 6 - 400 V
• In accordance to DIN ISO 0680
• For the professional, multi-stage voltage and polarity test
• For direct and alternating voltage
• With rotating field and phase display
consists of:
150.3076 Receiver
200
150.3077 Transmitter with crocodile clamps
200
VOLTAGE TESTERS
Insulated voltage tester 150 - 250 V
• In accordance with DIN/ISO 0680
• Slot blade with hollow grinding
• Nickel-plated blade
• Transparent handle
• With retaining clip
Technical data:
Readout:
light-emitting diodes/LE
Power requirement:
140 mA
Allowable duty cycle:
30 s
Frequency range:
0 - 100 Hz
Protection class:
IP40
AC voltage range alternating voltage: 12 - 50 - 120 - 230 - 400 V
DC voltage range direct voltage:
150.0999
12 V infrared and high frequency key tester
320
911.2188
3.0
145.0
65.0
80.0
14
550.1501
12 - 50 - 120 - 230 - 400 V
180
398
GD_KP_$KT-K14-$KP-AUTO-ELEKTRIK_#SALL_#APR_#V1.indb 398
27.03.2015 12:25:11