Dossiers A Better Life The Psionic Predator, by Charles Cosimano | Page 72

To make this you will need:
1 amplifying pattern, about 4" in diameter.
1 small foil circle for the center of the pattern.
The innards of a cheap walkie talkie
1 switch
some wire.
A project box.
Take the walkie talkie apart and mount the innards inside the project box with a hole cut
for an off-off switch. Wire the push-to-talk button thing in the talk position so that it
remains open and turn on the power switch of the walkie talkie. Drill a hole for the
antenna wire to come out. Drill two holes in the top of the box.
Cut one of the battery wires and connect that wire to the switch so that when the switch
is closed the current will run through it. You may need to extend that wire, in which
case you will splice the extra wire to it as needed. Mount the switch on the box.