2. If a home has high levels of radon, I’ll be able to detect it
Radon is called a “silent killer” for a reason. This radioactive gas is odorless, tasteless, and colorless. Unlike other gases like carbon monoxide that have a distinct odor, radon is essentially undetectable to our senses.
Since humans alone can’t identify the presence of radon, short term test kits must be used to accurately assess radon levels in a home. Without regular testing, radon can seep into homes without ever being detected.
3. I can just air out a home to lower radon levels
Some real estate agents offer this suggestion during housing transactions as a way to lower radon test levels. Not only is this an ineffective method, but it also violates radon testing protocols that require homes be in a “closed house condition” for accurate assessment.
Plus, the EPA notes that a home’s radon levels typically return to previous values within 12 hours of closing windows anyway. Realistically, this method is not a long-term option and can actually reduce a home’s indoor air quality by bringing in other outdoor pollutants.
4. Radon is only an issue in certain kinds of homes
Another myth is that only tight houses and houses with basements are susceptible to radon. The reality: All homes – old, new, drafty insulated, basement or no basement – can have radon problems.
Why is this? Radon comes from the breakdown of uranium in soil. If a house sits on soil, then it has the potential for radon infiltration.
Many homeowners also assume that radon is not an issue in new construction homes. After all, it’s the builder’s responsibility to test radon levels and include the proper mitigation solutions, right? Not necessarily – because, as all pros know, building codes vary vastly from state to state.
In fact, only 9 states (California, Illinois, Massachusetts, Maryland, Michigan, Minnesota, New Jersey, Oregon, and Washington) have building codes that require radon-resistant new construction (RRNC).
It’s not uncommon for builders to forgo proper radon testing and mitigation, viewing it as an added cost. Unless local building codes require RRNC, there’s no guarantee that new homes are properly protected.
5. My neighbor’s home has low radon levels, so mine probably does too
The factors that affect radon levels, such as soil composition and ground permeability, are specific to a home’s plot of land. While it’s reasonable to assume that neighboring homes probably have the same soil and permeability, this isn’t necessarily the case.
Additionally, differences in home construction between neighboring homes can also account for varying levels of radon. Radon travels the path of least resistance, so if a home has more potential pathways – like cracks in a basement - it may have higher levels.
cracks in a basement – it may have higher levels.
6. Once you have a radon mitigation system, you don’t need to test again
Just like any appliance, radon mitigation systems will lose efficiency over time. The average lifespan of a radon fan is 5-10 years. If the system was not properly installed, the system can also be less effective.
On top of this, radon levels fluctuate seasonally, with higher levels during the winter months. Occupancy, or how residents live within the home, can also affect radon levels. With all of this in mind, it’s recommended to test a home’s radon levels every two years.
All in all, education is the key in the fight against radon. People who don’t know or are misinformed about the risks of radon don’t do anything to prevent it; those who do know, test.
Learn more about Fantech’s series of radon testing and mitigation solutions for proper protection.
43