Corrected ARC Guidelines PRINT FULL SETS - Master PDF 112 Pages - as of 9-2 | Page 54

SECURITY LIGHT FIXTURES/CAMERAS 2.14
ANY CHANGE TO THE OUTSIDE OF THE HOME REQUIRES BOTH NARC AND ACC APPROVAL
1. Obtain an application form from Kings Ridge Management Office (CMO) located at the
clubhouse. Submit the application form with a copy of the following; the guideline, a
drawing indicating placement, the product data with specifications, and any other pertinent
information. Return your completed application to the CMO.
2. Do not start construction of any improvement, alteration, or addition to any existing
structure or make any site improvements or changes prior to approval. After receiving
approval from the ACC, obtain and pay for all permits that may be required by
governmental authorities. Upon completion submit copies of all permits to the CMO for
filing with your Architectural Application.
3. Proposed work shall start within 45 days of approval and shall be completed within 180
days of commencement. Time extensions may be granted by the NARC upon written
request.
4. Security lights mounted on the home shall be surface mounted lamp holder type and not a
decorative light fixture. Recessed type fixtures are permitted in lieu of surface mount.
5. Lamp holder, Security Cameras, and any applicable lamp cover or pole, including trim shall
be white in color.
6. Mount surfaced mounted fixtures to the metal soffit under the eave or rake of the roof.
Wall mounting not permitted. Recess the fixtures in the metal soffit to cast a down light
beam.
7. Maximum of two lamps per holder, or one recessed fixture at any one location with a
maximum of four locations on the home. Maximum wattage per lamp shall be 150
incandescent.
8. Position and aim lamps so as not to illuminate adjacent neighbor’s homes.
9. Lights shall be activated by means of a motion detector or other purpose made device.
Lights shall not remain on for more than 7 minutes for any activation. Lights shall not be
left on where neighbors will be impacted.
Page 1 of 2
Approved by the Board of Directors April 26, 2017
Effective April 26, 2017