OTA ANTENNAS Televes Accessories
Avant X OTA Processor“ F” Domestic Amplifier( UL certified) # TEV532180- $ 399.00
Multi-input multiband amplifier, perfect for terrestrial individual or MDU( Multi Dwelling Unit) installations, that allows programming up to 32 digital filters on 4 LowVHF + HighVHF + UHF inputs( DTT).
The multiband amplifier is equipped with 6 inputs: __ FM, 4 x LowVHF / HighVHF / UHF, & CATV __ and can achieve
programmable amplification and balancing of the different RF inputs.
5 outputs( 4 + TV): VHF / UHF # TEV552380- $ 35.00
Domestic amplifier with 5 outputs( 4 + TV) to extend the terrestrial television domestic network. The TV output provides a lower gain for direct connection to the television set( no outlet installation. The amplifier is UL certified( US plug).
Thanks to ASuite, the multiband amplifier programming is very easy and intuitive using an Android or Windows / Mac application.
The multiband amplifier is able to detect LTE signals and automatically set the filter to channel 36( for LTE600) or 51( for LTE700), thanks to the automatic LTE filtering.
“ F” Power Supply Unit( UL certified) # TEV550104- $ 29.00
Domestic 12 V-power supply( 220 mA) that powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Included in the installation to power either mast amplifiers or a BOSS system. Furthermore, it is equipped with two outputs. The power supply is UL certified( US plug).
TForce Mast Amplifier w / BOSS Tech and“ F” Power Supply Unit
Active device that filters and amplifies terrestrial television signals coming from a single antenna, optimizing LTE band rejection up to channel 36( Repack Ready). Equipped with either a single input or two inputs for amplification on LowVHF, HighVHF and UHF bands. The amplifier is powered through the output coax.
The kit is complemented with a domestic 12 V-power supply unit( 220mA), which is included in the installation kit to provide the amplifier with the necessary power. The PSU powers equipment through the input coaxial cable while allowing the transmission of the TV signal. Furthermore, it is equipped with two outputs. This power supply is UL certified( US plug).
These devices allow the installer to adapt the output level according to the necessary characteristics of the distribution network.
1 input, 608 MHz # TEV560383- $ 69.00
2 input, 608 MHz # TEV560483- $ 79.00
SmartKom 3 Antenna Amplifier
# TEV531981- $ 199.00
SmartKom is a professional OTA television signal processing solution designed for simple and easy installation. Users will easily be able to filter, balance, mix and amplify television signals received from up to a maximum of 3 antennas thus, increasing the number of channels received in a given location while avoiding the use of mechanical solutions such as rotors. This allows for the distribution of television programs received from the antennas over a single Coax Cable routed to the home. SmartKom is compatible with ATSC 1.0 and ATSC 3.0( The new Broadcast TV Standard) including High Definition and Ultra High Definition programs. SmartKom can be installed indoors or outdoors, within the provided weatherproof enclosure.
Terrestrial Signal Combiner
3 inputs: LoVHF / FM-HiVHF / DAB-UHF # TEV404010- $ 27.00
3-input combiner for several terrestrial bands. Includes mast-mount case for outdoor installation. Allows current pass from output to UHF input to power a mast amplifier or a BOSS system.
EasyF connection system: simplicity and savings EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.
• Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
• Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
• Cost savings: no additional connectors are required( neither F nor IEC)
• Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
• Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:
1. Unscrew the device’ s cover to access the connection 2. Insert the previously stripped coaxial cables 3. Close the cover and screw to ensure connection
COLLINS DISTRIBUTION( 800) 825-1100 collinsdistribution. com
37