INCORPORATING COLD CHAIN

PRODUCTS

The STRATOS VSP series comprises air-cooled chillers in the upper capacity range . It covers a very wide range of applications like process cooling , air conditioning and industrial applications .

The STRATOS VSP models are equipped with V-shaped condenser coils and six to sixteen EC fans . Depending on the size , the units of the STRATOS VSP series have one or two independent refrigerant circuits , each with a compact screw compressor with eco function . Together with the use of microchannel condensers , this results in the lowest possible refrigerant charge quantities per circuit . Semi-hermetic screw compressors are used , which were specially developed for use with flammable refrigerants . The capacity control is stepless via inverter . Only R290 ( propane ) is used as refrigerant in this series . All components used comply with the highest quality standards and valid safety requirements . All units are subject to a test run with functional checks before delivery .

The hydraulic piping is made of stainless steel and components such as butterfly valves , Y-filter , vent valve , filling and draining valve , as well as a safety valve are already standard .

Available options :

• Heat recovery

• Free cooling ( integrated or separate )

• Low noise

• Integrated primary pumps ( constant or regulated )

• Efficient flow

• Machine control Siemens S7

Areas of application :

• Process and data centre cooling ( HT )

• Air conditioning and process cooling at medium temperature level ( AC )

• Medium-temperature cooling ( MT )

Capacity range :

• HT : 200 – 1.200kW

• AC : 150 – 1.000kW

• MT : 100 – 900kW

For more information , call + 91 80 4119 7778

These cutting-edge units are engineered to redefine industry standards and address environmental concerns by replacing high global warming potential ( GWP ) refrigerants such as R404a .

The new range is suited to a wide range of applications including chilled and low temperature display cases , walk-in cold stores , blast chillers , freezers and other process cooling applications across a wide range of sectors .

The entire Panasonic cold chain range of equipment operates on natural refrigerant R744 ( CO 2

). The units offer an ozone depletion potential ( ODP ) of 0 and a minimal GWP of 1 , making it the ideal choice for end users to take when investing in new equipment .

The units offer a high degree of flexibility with extended pipe runs of up to 100m , and a small compact footprint of 1.06m 2 – reducing the need for larger plant spaces . With features such as night-time low noise operation , the units are suitable for locations close to residential areas , particularly of benefit to the convenience store market . Fully inverter driven , the

systems provide unrivalled energy efficiency and can operate in ambient temperatures from as low as -20 o C and as high as + 45 o C , ensuring reliable operation no matter the climate .

For more information , call + 44 ( 0 ) 149 442 7500

BITZER – the refrigeration , air conditioning and heat pump specialist – advises that for all orders received from 1 January 2024 , ECOLINE reciprocating compressors of the C3 series or later installed at the Schkeuditz factory will come with the new generation of the IQ Module CM-RC-02 .

IQ Module simplifies and optimises compressor installation , operation , maintenance and retrofitting for refrigeration , air conditioning and heat pump systems .

Since the beginning of the year , the Schkeuditz factory has been replacing the SE-B3 compressor protection devices

in semi-hermetic Ecoline reciprocating compressors of the C3 series and later with the CM-RC-02 , the new generation of the BITZER IQ Module . This not only assumes the functions once covered by the compressor protection device , but also offers a new world for operating the installed compressor functions as well as new digital services .

In addition to monitoring the compressor ’ s key operating parameters , the IQ MODULE CM-RC-02 can also operate compressor motor protection and the oil heater and keep an eye on the discharge gas temperature and oil supply . The high-pressure switch can be connected directly to the compressor module . The CM-RC-02 simply requires the switch signal from the superior system controller to activate the compressor .

For detailed information and the wiring diagrams for electrical installation , please consult the KT-240 technical information for the compressor module and the AT- 300 document on wiring diagrams , which can be found on the BITZER website .

For more information , call + 49 7031 932 4327