INJECTORS
MERCEDES
Injectors extractor kit
Fork extractor with adapter M18X1,5 - M12 for removing Piezoelectric, DELPHI PIEZO and
DELPHI DFI 1.5 injectors.
SLIDE HAMMER IS NOT SUPPLIED.
Injectors: Piezoelectric
Models: Mercedes
Engine: 2.1 CDI
Engine codes: OM 651
INJECTORS
Injectors: DELPHI PIEZO and DELPHI DFI 1.5 (Euro 5)
Injector codes: EMBR, EJBR (cars) and EJDR (commercial vehicle)
Models: Daimler, Hyunday and Kia
Injectors extractor kit
311 179 003
BOSCH
Injectors extractor kit
Hydraulic kit for removing injectors.
DELPHI
THE PUMP TO BE USED WITH THE HYDRAULIC
CYLINDER IS NOT SUPPLIED.
This kit can be used with all GOVONI injectors extractors equipped with supporting
cross piece.
After having carried out the procedure for mounting the cross piece/bridge connect the
cylinder to the hydraulic pump and proceed to extraction of the injectors by acting on
the pump controls. Ascertain that the cylinder does not encounter too much resistance
in ascent; if this should occur, unload the cylinder, loosen the nut and repeat the
procedure. Once the injector is extracted, remove screw and ring nut and dismount the
other injectors by following the same procedure.
lnjectors: Bosch, Delphi
Renault
Nissan
+
Connection: 3/8“ NPT
Power: 12 ton
Stroke: 42 mm
Dimensions: H 120, Ø 69 mm
Pressure: 700 bar
Weight: 2,8 Kg
Hole: 20,2 mm
Injectors extractor kit
+
100
311 116 000
COMPLETE WITH:
271 004 000
GOVONI | Via degli Orsi, n. 97 | 40014 Loc. Beni Comunali | Crevalcore (BO) Italy | Tel.: +39.051.982688 | www.govoni.it