Catalogo Kemppi Inglês Catalogo Kemppi Versão Inglês | Page 41

Applications
Technical specifi cations
X3 Power Source 400
Mains connection voltage
3~ 50/60 Hz
Open circuit voltage 380 – 440 V (-10…+10 %) 380 – 440 V (–10…+10 %)
Uav 52 – 57 V 25 A 32 A
60 % ED 400 A / 34 V 500 A / 39.0 V
100 % ED 310 A / 29 V 390 A / 33.5 V
Fuse
Output
500
57 – 62 V
Welding current and voltage range 25 A/15 V - 400 A/38V
25 A/15 V - 500 A/43 V
Operating temperature range -20…+40 °C
-20…+40 °C
EMC class A
A
Degree of protection IP 23S
IP 23S
External dimensions L x W x H 629 x 230 x 414 mm
629 x 230 x 414 mm
Standards IEC 60974-1, EC 60974-10 IEC 60974-1, EC 60974-10
The X3 Power Source weighs less than similar
equipment and delivers power-ful welding
performance without any compromises on
quality. Ergonomically positioned handles and
optional wheel sets facilitate the system’s easy
transfer from one site to another. The less valu-
able production time is used to move hardware,
the more productive your welding will be.
X3 Wire Feeder 300
Gun connection
Euro
Wire feed mechanism
Filler wires
4-roll
Fe 0.6…1.6 mm
MC/FC 0.8…2.0 mm
Wire feed speed 0…25 m/min
Wire spool weight (max) 20 kg
Wire spool diameter (max) 300 mm
Operating temperature range -20…+40 °C
Degree of protection IP 23S
External dimensions
L x W x H
Standards 590 x 240 x 445
mm
IEC 60974-5,
IEC 60974-10
Using the P 20 transport unit and the X3 Wire
Feeder mounting kit you can move the welding
set and the gas cylinder conveniently as a
whole.
Ordering information
Power sources
Cables
X3 Power Source 400 X31004000 Interconnection cable 50-1,8-G 6260508
X3 Power Source 400 AU X31004000AU Interconnection cable 70-1,8-G 6260518
X3 Power Source 500 X31005000 Interconnection cable 50-5-G 6260500
X3 Power Source 500 AU X31005000AU Interconnection cable 70-5-G 6260501
Interconnection cable 50-10-G 6260513
Interconnection cable 70-10-G 6260514
Interconnection cable 50-15-G 6260515
Interconnection cable 70-15-G 6260516
Wire feeder
X3 Wire Feeder 300
X31003000
Transport units
P 20 transport unit
6185261
Accessories
• Steel structures
• Mechanical engineering
• Shipbuilding
Interconnection cable 70-20-G 6260523
X3 Wire Feeder mounting plate X37000003 Interconnection cable 70-30-G 6260633
X3 Wheel Set X37000001 Extension cable 70-10-G 6310710
X3 Four Wheel Set X37000002 Extension cable 70-15-G 6310715
MIG guns Extension cable 50-10-G 6310510
MMT 42, 3 m 6254213MMT Extension cable 50-15-G 6310515
MMT 42, 4.5 m 6254214MMT Earth return cable 50mm2 5m 6184511
Earth return cable 70mm2 5m 6184711
The X3 MIG Welder’s MIG/MAG process
has been carefully tuned to give the arc
outstanding stability, which makes it easy to
manage and creates a minimum amount of
spatter – also when using inexpensive CO2
shielding gas. When the need for post-weld
grinding is reduced, welders can focus on
productive weld-ing.
Crater fi ll function reduces the voltage level at
the end of the weld and ensures the best arc
control right to the fi nish. The end of the weld
is nice and clean, which makes it easy to start
the next weld without wasting welder’s tie in
grinding.
X3 MIG Welder
41