Dovetail Cutter Bits
Flush Trim Bits
Model
Cutting Cutting
Dia. (D) Length
Reg.
1051272 1/2” 1/2” SALE
$ 9.29 $6.99
1071901 3/4” 3/4” $10.49 $7.99
$12.99
Model 5551901
1” 1/4” $ 8.99 $ 6.99 3051271 1/2” 1” 1/4” $10.99 $ 8.99 Model 3071271 1/2” 1” 1/2” $10.99 $ 8.50 3251272 1/2” 1” 1/4” 3071273 1/2” 1 1/2” 1/2” $15.99 $12.50 3251591 5/8” 1” 1/4” $13.99 $10.99
3071274 1/2” 2” 1/2” $20.99 $15.99 3271901 3/4” 1” 1/2” $15.99 $12.50
Straight Bits Double Flute
$10.99
$39.99
Model 837889B
Reg. $51.99
In combination with stile and rail
cutter, you can use the raised
panel cutters to produce the
door of your choice. Designed
for use with 3/4” stock
• Dia: 3 1/2”
• Cutting Length: 5/8”
• Shank Dia: 1/2”
Wedge Tongue &
Groove Bit Set
$63.99
Model 787420A2
Reg. $83.29
Used for glued or non-glued
joints on panels. For use on
router table.
• Dia: 1 21/32”
• Cutting Length: 1 3/32”
• Angle: 10 degree
• Cutting Depth: 5/16”
• Shank Dia: 1/2”
Model Cutting
Dia. (D)
Cutting
Length Shank
025079B3 5/16” 2” 1/4” $14.50 SALE
$10.99
027111B3 7/16” 2” 1/2” $17.50 $13.99
Reg.
Suited for cutting mortises, grooves,
dadoes and routing deep blind holes.
Model Cutting
Dia. (D)
Cutting
Length Shank
065032R 1/8” 1/2” 1/4” $16.99 SALE
$13.50
065063R1 4” 1” 1/4” $20.99 $15.99
Flute and Bead Bit -
Male
Face Molding Bit
$30.99
Model 767318F
Reg. $40.99
Enhance your furniture
or door casings with
this face-molding bit.
Will give your projects
that special look and
give that architectural
appearance.
• Dia: 1 1/4”
• Cutting Length:
1 5/8”
• Radius: 5/16”
• Shank Dia: 1/2”
Tongue & Groove Set
$30.99
Model 797476B2
Reg. $39.99
Reg.
$15.99
Model 787381A
Reg. $20.29
These bits make perfect
matching edges for planking
small boats and canoes and
many other projects.
• Dia: 1 1/2”
• Cutting Length: 1/4”
• Radius: 1/8”
• Shank Dia: 1/2”
Use on edge to edge stock or
edge to end 3/4” stock. For use
on router table.
• Dia: 1 3/4”
• Cutting Length: 7/32”~ 3/8”
• Cutting Depth: 0.442”
• Shank Dia: 1/2”
Lock Miter Bits
This bit gives a superior 90 degree lock miter
joint. Run one board vertically and then the other
horizontally in one set up. Use only with Router Table.
Model
Cutting Cutting
Dia. (D) Length
805381A 1 3/8” 1/2”
Angle Shank
----- 1/4” $37.50
Reg.
SALE
$27.99
807508A 28” 1/2” 15 o 1/2” $49.99 $37.99
Raised Panel Bit
• Ideal for
decorative corner
joints on jewelry
boxes etc.
• Dia: 3/4”
• Cutting Dia.:
1 5/8”
• Cutting Length:
2/32”
• Cutting Depth:
3/8”
• Shank Dia: 1/2”
SALE
Smooth cutting bit
for lettering and
sign work, with top
bearing guide.
• Dia: 3/4”
• Cutting Length:
5/8”
• Radius: 1/4”
• Shank Dia: 1/4”
$62.99
Model 237420A
Reg. $83.99
Reg.
$13.29 $ 9.99
For cutting dados and rabbets or any
application that requires a straight edge.
Up Spiral Router Bits
Finger Joint Bit
Cutting Cutting
Dia. (D) Length Shank
Make perfect incisions
on panels, door fronts, or
engrave lettering.
• Dia: 1/2”
• Cutting Length: 1/2”
• Angle: 90 degree
• Shank Dia: 1/4”
Model 195190D
Reg. $14.99
SALE
3/8”
$7.99
Core Box Bit with
Bearing
Reg.
For use when pattern
is mounted on top of
the work. Excellent for
parts duplicating and
lettering.
3050951
Model 115127D
Reg. $10.29
Reg. $16.99
20
Cutting Cutting
Dia. (D) Length Shank
Model
V-Groove Bit with
Top Bearing
Plunge Classical Bit
with Top Bearing
Create decorative edge
profi les, perfect for
enhancing doors and
drawer fronts.
• Dia: 3/4”
• Cutting Length: 15/32”
• Radius: 3/32
• Shank Dia: 1/4”
For cutting fast smooth
and accurate trimming
of template work or
laminates. The use of
two fl utes makes for
fast cutting.
• For exquisite appearances
on drawers, fi ne furniture,
dovetail jointsAngle (A): 14 o
• Shank: 1051272: 1/4”
1071901: 1/2”
Flush Trim Bits (with top bearing)