6 ” x 9 ” Belt & Disc Sander Combo
16 ” Drum Sander 18 ” Open End Drum Sander
$ 499
Model CX512 Reg . $ 549.00
$ 1,599
Model CX507 Reg . $ 1,899.00
$ 1,499
Model CX509N Reg . $ 1,899.00
• Motor : 1 HP , 120V , 60Hz , 8 Amps
• No Load Speed : 3400 RPM
• Belt Size : 6 ” x 48 ”, Disc Diameter : 9 ”
• Heavy duty stand
• 3 Year Warranty
• Motor : 1HP 110Volt , 60-Hz , Single Phase
• Conveyor Belt Feed Motor : 1 / 15HP
• Feed Speed : 2 - 10 FPM
• Drum Speed : 1,720 RPM
• 3 Year Warranty
• Motor : 1.5HP , 110V single phase , 11.5A
• Electronic Variable Speed Conveyor : 2 - 12 FPM
• Drum Surface Speed : 4000 FPM
• 3 Year Warranty
16 - 32 Drum Sander
$ 1,999 Model SUPMX71632
• INTELLISAND™ Technology Adjustments .
• Motor : 1-1 / 2 HP , 110V , 15 Amp , 20 AMP Service
• Drum Speed : 1740 RPM
• Maximum Sanding Width : 32 ”
• Conveyor Speed : 0-10 FPM
Optional Accessories Model SUPMX716327F Folding Table
$ 199.00 Model SUPMX980130 Castor Set of 4
$ 129.00
• INTELLISAND™ Technology Adjustments .
19 38 Drum Sander
$ 2,599 Model SUPMX71938D
• Motor ( TEFC ): 1-3 / 4 HP , 110V , 15 Amp
• Conveyor Motor : 43 ” -lb . torque , direct drive D . C . motor , ranged variable 0-10 FPM .
• Drum Speed : 1740 RPM
• The drum is prewrapped with 80 grit sandpaper
Optional Accessories For 19 38 Sanders |
Model SUPMX719380P Open Shelf |
$ 299.00 |
Model SUPMX719381 |
Sanding Drum Head |
$ 299.00 |
Model SUPMX719382 |
Wire Brush Head |
$ 1,499.00 |
Model SUPMX719383 |
Nylon Brush Head |
$ 1,499.00 |
Model SUPMX719387F Folding Feed Table |
$ 199.00 |
19 38 Combo Brush Drum with Stand
$ 4199 Model SUPMX71938
• Motor ( TEFC ): 1-3 / 4 HP , 110V , 15 Amp
• Conveyor Motor : 43 ” -lb . torque , direct drive D . C . motor , ranged variable 0-10 FPM .
• Drum Speed : 1740 RPM
• Comes standard on the Open Stand
• The drum is prewrapped with 80 grit sandpaper
• INTELLISAND™ Technology Adjustments .
10
25 - 50 Drum Sander
$ 3,299 Model SUPMX72550
Optional Folding Table Model SUP7M387FCL $ 199.00
The largest open-ended drum sander on the market
• Motor : 1-3 / 4 HP , 110V 20 Amp , 20 AMP Service
• Drum Speed : 1740 RPM
• Maximum Sanding Width : 50 ( two passes )
• Conveyor Speed : 0-10 FPM
37 ” Wide Belt Sander
$ 17,999 Model W1737
Special Order
• Motor : 10 HP 1 Phase , 50A , 1725 RPM
• Built-in air filter
• Independent motor control
• Pneumatic belt tracking and tensioning
• Digital sanding load meter
• Digital readout and control panel
• Steel cabinet
• Steel outfeed / infeed drum
Mortising Machine with Tilting Head
$ 729
Model CX302 Reg . $ 849.00
• Motor : 3 / 4 HP , 110V , 1 Phase , 6 Amps
• Speed : 1720 RPM
• Chisel Capacity : 1 / 4 ” to 5 / 8 ”
• Chuck Capacity : 1 / 2 ”
• 3 Year Warranty
• Comes complete with mortising chisel set ( 1 / 4 ”, 5 / 16 ”, 3 / 8 ” & 1 / 2 ” bits )
Optional Stand Model CX302ST $ 159.00