Busy Bee Tools 2019 Summer Catalogue | Page 23

Drill Chuck Arbors Adjustable Circle Cutters Metal Shims B110D Precision 5C Collets $17.99 Model B1256 B116D • Precision hardened and ground Tool Steel • For 3/8” x 16 TPI Draw Bars Model Cuts $39.99 $34.50 $45.00 $39.99 Model Taper Reg. SALE B110D MT2-JT6 $10.99 $7.99 B2607 1 1/2” - 6 1/2” B116D MT3-JT6 $ 9.99 $7.99 B2608 1 1/2” - 8” The Ultimate V-Block $59.99 Model B026 Reg. $72.99 • Overall length: 3 1/2” • Length of V-Block surface: 2” • Overall width: 1 7/8” • Height of V-Block with clamp: 4 1/4” • Round bar capacity: 1 5/16” H. D. Cross Sliding Table Reg. $19.99 • The knurled knob has ten divisions each representing 1/200th inch movement • Not for use with hand drills. Reg. SALE V-Blocks • 1/2” x 3” • 2 each of: 3/8” 1/4”, 1/8”, 1/16”, 1/32” • Tooling not included SALE B361 $21.99 $17.99 $59.99 SALE $8.29 B185 3/8” $9.99 $8.29 B187 1/2” $9.99 $8.29 B188 9/16” $9.99 $8.29 5C Collet Fixture $95 $269 • Collet does not move up or down, retains positive • relation to base. With cam lock release. • (Collet not included) • Height: 3 3/4” • Base: 5” x 3 5/8” Reg. 5” x 2 3/8” x 2 5/8” $9.99 • Can be used with any metal cutting machine for reduced tool wear $29.99 • Maximum capacity of 5 gallons and comes with hose, switch and a flexible nozzle $45.00 • Wired for 220V Only with no plug Sizes B363 Reg. 1/4” Model B1963 Reg. $109.00 3” x 2 3/8” x 2 5/8” $41.99 Hole Size B183 Model B3087 Reg. $299.00 Model 4” x 2 5/8” x 3 1/2” Model Coolant Pump System w/Magnetic Base Supples in matched and numbered pairs, these V-Blocks are manufactured from high quality castings. B362 • 1 1/4” x 20 TPI • High-grade steels and tolerances as the R8 collets. 52pc Clamping Kit Jaw Chucks With Aluminium Plate Rapid Indexer $269 Model B2725 Reg. $299.00 $199 Model B339C Reg. $225.00 • Table surface: 5 1/2” x 12” • Table Cross Travel: 5” • Table Longitudinal Travel: 8” • T-Slots: 2-1/2” Centers • Base size: 8” Dia. • 3 Jaw Chuck 3 3/16” for big range clamping. • Useful for 2 direction horizontal & vertical milling & drilling operations. • B2710 comes complete with mounting bolts and large chuck-key • B2711 comes complete with 2 sets of jaws, mounting bolts and chuck-key Model Type Reg. B2710 4 Jaw $129.00 $ 99.99 B2711 3 Jaw $169.00 $155.00 18” Mini Bender SALE $74.99 Model B054 Reg. $103.99 • 1” Wide blocks • Tool Steel, forged and hardened • 1/2” x 13NC studs • T-Nuts fit 5/8” table slots Lathe Chucks $59.99 Model B231318 Reg. $72.99 • For shops, schools, and hobbyists • Clean smooth bends up to 90-degree • Use for heating and cooling ducts, fabrication of boxes, covers, and trays • Will bend and form up to 16 gauge steel • Requires 2 “C” clamps to use B019 440504 440510 Model Type Size Reg. 440504 3 Jaw 3” $155.99 SALE $129.00 B019 3 Jaw 4” $172.99 $135.00 440510 3 Jaw 5” $166.99 $145.00 B010 3 Jaw 6” $267.99 $229.00 B010 • These chucks are suitable for toolrooms and production work. • Each chuck comes complete with 2 sets of jaws (inside and outside), mounting bolts and chuck-key. FREE SHIPPING ON ORDERS OVER $100 & UNDER 30 kgs. 23