Brochure-HDPE-Fittings-2021 - Page 25

Butt Fusion IPS 90 ° Elbows

SDR 7 ( STANDARD DIMENSION RATIO ) 335 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FM Pressure Rating ( psi .)
FF-51.113.0002.07 2 ” IPS 5.75 4.25 2.45 0.339 2.38 335 FF-51.113.0003.07 3 ” IPS 7.53 5.65 3.05 0.500 3.50 335 FF-51.113.0004.07 4 ” IPS 8.68 6.13 3.25 0.643 4.50 335 FF-51.113.0006.07 6 ” IPS 12.80 9.28 4.05 0.946 6.63 335 FF-51.113.0008.07 8 ” IPS 15.75 10.71 4.80 1.232 8.63 - FF-51.113.0010.07 10 ” IPS 18.82 12.64 5.55 1.536 10.75 - FF-51.113.0012.07 12 ” IPS 20.83 14.29 5.98 1.821 12.75 -
• Molded from black PE 100 / 4710 resin & NSF-61 certified
• Complies with the following product standards : ASTM D2513 , D3261 , D3350 , and AWWA C906
• Made in the USA
SDR 9 ( STANDARD DIMENSION RATIO ) 250 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FM Pressure Rating ( psi .)
FF-51.113.0002.09 2 ” IPS 5.75 4.25 2.45 0.264 2.38 250 FF-51.113.0003.09 3 ” IPS 7.53 5.65 3.05 0.389 3.50 250 FF-51.113.0004.09 4 ” IPS 8.68 6.13 3.25 0.500 4.50 250 FF-51.113.0006.09 6 ” IPS 12.8 9.28 4.05 0.736 6.63 250 FF-51.113.0008.09 8 ” IPS 15.75 10.71 4.80 0.958 8.63 - FF-51.113.0010.09 10 ” IPS 18.82 12.64 5.55 1.194 10.75 - FF-51.113.0012.09 12 ” IPS 20.83 14.29 5.98 1.417 12.75 -
Notes : 1 . All dimensions shown are nominal and subject to manufacturing tolerance . OD and minimum wall are determined in accordance with ASTM standards . Drawing shown is an approximation only . 2 . The maximum pressure for gas applications should be calculated based on the applicable local and federal regulations . 3 . Fittings are marked to meet the applicable standards . 4 . Only fittings with a FM pressure rating are FM approved .
• FM Approval Class 1613
25