Brochure-HDPE-Fittings-2021 - Page 24

PIPE & FITTING SYSTEMS

Butt Fusion IPS 45 ° Elbows

SDR 11 ( STANDARD DIMENSION RATIO ) 200 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FF-51.110.0075.11 ¾ ” IPS 4.53 2.44 1.77 0.10 1.05 - FF-51.110.0001.11 1 ” IPS 4.84 2.56 1.85 0.12 1.32 - FF-51.110.0125.11 11⁄4 ” IPS 5.71 2.99 2.05 0.15 1.66 - FF-51.110.0150.11 1½ ” IPS 6.14 3.23 2.24 0.17 1.90 -
FM Pressure Rating ( psi .)
FF-51.110.0002.11 2 ” IPS 6.38 3.23 2.52 0.22 2.38 200 FF-51.110.0003.11 3 ” IPS 9.09 4.57 3.39 0.32 3.50 200 FF-51.110.0004.11 4 ” IPS 10.24 5.04 3.58 0.41 4.50 200 FF-51.110.0006.11 6 ” IPS 13.82 6.61 4.53 0.60 6.63 200 FF-51.110.0008.11 8 ” IPS 16.97 8.15 5.63 0.79 8.63 200 FF-51.110.0010.11 10 ” IPS 20.28 9.61 6.18 0.98 10.75 200 FF-51.110.0012.11 12 ” IPS 21.93 10.04 6.50 1.16 12.75 200
• Molded from black PE 100 / 4710 resin & NSF-61 certified
• Complies with the following product standards : ASTM D2513 , D3261 , D3350 , and AWWA C906
• Made in the USA
• FM Approval Class 1613
SDR 17 ( STANDARD DIMENSION RATIO ) 150 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FF-51.110.0002.17 2 ” IPS 6.38 3.23 2.52 0.14 2.38 - FF-51.110.0003.17 3 ” IPS 9.09 4.57 3.39 0.21 3.50 - FF-51.110.0004.17 4 ” IPS 10.24 5.04 3.58 0.26 4.50 - FF-51.110.0006.17 6 ” IPS 13.82 6.61 4.53 0.39 6.63 - FF-51.110.0008.17 8 ” IPS 16.97 8.15 5.63 0.51 8.63 - FF-51.110.0010.17 10 ” IPS 20.28 9.61 6.18 0.63 10.75 - FF-51.110.0012.17 12 ” IPS 21.93 10.04 6.50 0.75 12.75 -
FM Pressure Rating ( psi .)
Notes : 1 . All dimensions shown are nominal and subject to manufacturing tolerance . OD and minimum wall are determined in accordance with ASTM standards . Drawing shown is an approximation only . 2 . The maximum pressure for gas applications should be calculated based on the applicable local and federal regulations . 3 . Fittings are marked to meet the applicable standards . 4 . Only fittings with a FM pressure rating are FM approved .
The Plastics Experts . 24